Panasonic CU-C24DKU - Manual (Page 6)

6
TEMP
POWERFUL
AIR SWING
FAN SPEED
1 2 3
TIMER
COOL
AUTO
AUTO
AUTO
FAN
RESET CLOCK
OFF/ON
MODE ECONOMY
QUIET
ON
OFF CANCEL
SET
HOW TO OPERATE
Timer
●
Press CLOCK button for more than 10 seconds to change the time format - from AM/PM format to 24 hour format.
●
For your convenience, you can set the air conditioner to operate automatically by using both ON and OFF timer.
Hints
Troubleshooting
●
TIMER indicator always on. ➤ Timer is activated and the setting will repeat itself daily.
●
POWER indicator is blinking 15 minutes before ON
timer is activated.
➤ The unit is determining the operation mode by sensing the room
temperature. This happens when it has been set to AUTO operation
mode.
■
Operation Details
• Use the ON timer to turn on the air
conditioner at the desired time. This
will give you a cooled environment, e.g.
when you return from work or wake up.
• When the ON timer is set, operation will
start 15 minutes before the actual set
time.
• Use the OFF timer to stop air conditioner
operation at the desired time. This can
save electricity while you are going out
or sleeping.
• The set timer will repeat daily once it is
set.
• If there is a power failure, you can press
the SET button to restore the previous
setting once the power resumes.
• If the timer is cancelled, you can restore
the previous setting by pressing SET
button.
TIMER
1
Select ON or
OFF timer. 2
Set the
desired time.
3
Confirm the
setting.
CANCEL
Cancel the
selected timer.
●
Ensure the clock on the remote control has been set
correctly.
● You can set both the ON and OFF timers at the same time.
●
To cancel either the ON or OFF timer, press
ON
or
OFF
,
then press
CANCEL
.