Panasonic WV-NP304 - Manual (Page 13)

13
FOCUS
ASSIST LINK
POWER
AUDIO OUT MIC IN
EXT I/O
1 2 3 4 C B A
MONITOR OUT
SD
CARD
12V IN
24V IN
ACT
100BASE-T/
100BASE-TX
r
t
y
q
w
e
!1 !0 o i u
■ Rear View
q Power indicator [POWER]
Green: This indicator will light green
when the power is on.
w SD memory card error indicator/
Focus assist indicator [SD CARD]
Red: Lights in the following cases.
• When images cannot be stored on
the SD memory card,
• When the focus assist function is
started,
• When BEST FOCUS is displayed.
e Focus assist button [FOCUS ASSIST]
Activates the focus assist function.
(
☞ page 18)
r Link indicator [LINK]
Orange: Lights when the communication
with a network is established.
t Network connector
Connect a LAN cable (category 5 or bet-
ter). (
☞ page 25)
y Access indicator [ACT]
Green: Blinks when the camera is
accessed.
u Monitor output connector (for adjust-
ment use only) [MONITOR OUT]
This connector is provided only for
checking the adjustment the angular field
of view or the focus on the video monitor
when installing the camera or when serv-
icing. (
☞ page 24)
i External I/O connector [EXT I/O]
Connect an external device to these ter-
minals.(
☞ page 25)
o Microphone input connector [MIC IN]
Connect a plug-in power type micro-
phone.
!0 24V AC/12V DC Power cable terminal
Connect to the 24V AC/12V DC power
supply. (
☞ page 24)
!1 Audio output connector [AUDIO OUT]
Connect an external powered speaker.