Panasonic KX-MB3020 - Manual (Page 73)

10. Useful Information
73
L When another person is adjusting stored data in the
unit, it may be overwritten. Make sure the unit is not
currently being used for the same function.
10.2.2 Using Device Monitor
You can confirm the setting information and current
status of the unit from your computer.
1 Start Multi-Function Station.
2
[ Utilities] i [Device Monitor]
L The [Device Monitor] window will appear.
3 Confirm the status of the unit.
[
Status]: Current status of the unit
Note:
L Additional information (toner and recording paper
status, unit information, etc.) will be displayed in
[
Status] tab by clicking [Advanced Information].
L You can update the status of the unit by clicking
[
Refresh].
L If a printing error occurs, the Device Monitor will start
automatically and display the error information.
L For details, see the help file by selecting [p] from
Multi-Function Station.
10.2.3 Using the web browser (LAN
connection only)
You can confirm the setting information and status of the
unit from the web browser.
1 Start Multi-Function Station. i [Utilities] i
[
Configuration Web Page]
L You can also access the unit by entering its IP
address in a web browser.
2 Select a category from the menu bar.
[
Status]: Toner and paper information, etc.
[ Device]: Current status of the unit, etc.
[ Network]: Network information, etc.
L When you select [Device] or [Network], you
can change which features are displayed by
clicking the feature tabs at the top of the right
frame.
3 Confirm the status of the unit.
Note:
L You can update the status of the unit by clicking
[
Reload].
10.3 Canceling the operations
You can cancel the current operation from the unit. You
can also select the desired operation to cancel.
1 { Stop}
L “ USER STOPPED” is displayed.
L If “ USER STOPPED” is not displayed, go to step
2.
2 To cancel printing:
Press {Stop} repeatedly to display “ STOP
PRINTING?”.
To cancel scanning (KX-MB3020 only):
Press {Stop} repeatedly to display “ STOP
SCANNING?”.
To cancel copying:
Press {Stop} repeatedly to display “ STOP
COPYING?”.
To cancel sending or receiving faxes (KX-
MB3020 only):
Press {Stop} repeatedly to display “ STOP FAX?”.
To cancel broadcast transmission (KX-MB3020
only):
Press {Stop} repeatedly to display “ BROAD
CANCELED?”.
To cancel fax redialing (KX-MB3020 only):
Press {Stop} repeatedly to display “ SEND
CANCELED?”.
3 { Set}