Panasonic DMC-FZ50 - Manual (Page 62)

Advanced
62
VQT0X92
2 Press /// to change the
expanded area.
• The expansion is canceled after
approximately 2 seconds.
• The following will return the AF area to the
original position.
– Changing the Focus switch to [AF] or
[AF MACRO].
– Changing the picture size or aspect.
– Turning the camera off.
• You can also record with manual focus in
motion picture mode [ ]. However the
screen is not expanded while recording
motion pictures.
• If you focus on the subject in Wide and
then rotate the zoom ring to Tele, the
focus may not be adequate. In this case,
focus on the subject again.
• You cannot set continuous AF (P91) when
manual focus is set.
• If you rotate the focus ring or zoom
ring while recording motion pictures,
recording pictures with audio or
adding audio to recorded pictures, a
grinding noise may be recorded.
• Use the assistance screen for a final
check of the focus.
• After canceling power save mode, focus
on the subject again.
Registering Personal
Menu Settings
(Registering custom
settings)
Select the desired recording mode and the
desired menu settings and then save them
in [
], [ ] or [ ].
• Set to the mode dial to the desired mode
and select the desired menu settings in
advance.
1 Press [MENU/SET] and then
press  .
2 Press  to select the [SETUP]
menu icon [ ].
3 Press / to select [CUST. SET
MEM.] and then press .
4 Press / to select [C1], [C2] or
[C3] and then press [MENU/SET].
EXIT MENU SELECT
REC 1 / 5
AUTO
AUTO SENSITIVITY
WB ADJUST.
PICT.SIZE
ASPECT RATIO
W.BALANCE
10 10
SET
MENU
SETUP
EXIT MENU SELECT
0 n MONITOR
CUST.SET MEM.
GUIDE LINE
WORLD TIME
CLOCK SET
1 / 5
SETUP
EXIT MENU SELECT
0 n MONITOR
GUIDE LINE
WORLD TIME
CLOCK SET
1 / 5
OFF
CUST.SET MEM.
SETUP
0 n MONITOR
GUIDE LINE
WORLD TIME
CLOCK SET
1 /
5
OFF
SET MENU SELECT
CUST.SET MEM.
SET
MENU