Panasonic D-Snap SV-AS10 - Manual (Page 12)

12
Charging the Battery
1
Connect the AC Mains Lead to the
AC Adaptor and the AC mains
socket.
• The AC Mains Lead does not fit
entirely into the AC Adaptor socket. A
gap will remain as shown
1.
And then connect the DC input lead
to the USB cradle.
2
Charge the battery.
• Align the connections.
• Be sure to turn the power off when
charging the battery.
• Do not insert this unit in a wrong
direction.
• The charge lamp blinks in about 3
seconds after connecting this unit with
USB cradle.
3
When the charge lamp turns off, the
battery is charged fully.
• It takes about 120 minutes.
Remove this unit from the cradle
while pressing the RELEASE
button.
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY
ACCESSIBLE.
DC IN 4.8V
SV-AS10_EB.book 12 ページ ２００３年９月４日 木曜日 午後４時３分