Panasonic SL-SX3314C - Manual (Page 4)

Boosts the
bass
S-XBS
M
1
4
3
2
2
1 0 - -
Other Play Methods
Program Play Play modes
Track number
Sequence number
Press [:,9] while
stopped to select the tracks.
Press [MEMO] to register.
Press [1/;] to start play.
Repeat steps 1 and 2 to
register up to 20 tracks.
∫To confirm the contents of the program
∫ Press [MEMO] while the disc is playing.
∫To delete the entire program
∫ Press [∫].
Changing the sound quality
Each time you press [EQ]
Concert hall-
like sound
Each time you press [MODE]
One track
repeat
All track
repeat
Random Random repeat
≥ The effect may differ between different kinds of music.
Anti-Skip System
This system reduces the skipping caused by vibration to a minimum.
You can change the anti-skip memory time to improve sound quality.
While stopped, each time you press and hold [MEMO]
Sound enhanced mode ,
10-second anti-skip memory
Anti-skip enhanced mode,
45-second anti-skip memory
RQT7178
No display (canceled)
4
Audio
Sampling frequency: 44.1 kHz
No. of channels:
2 (left and right, stereo)
Frequency response:
20 Hz to 20,000 Hz
(i0 dB to j7 dB)
Headphone output level:
RMS max. 6 mWi6 mW/
16 ≠ (adjustable)
Pickup
Light source: Semiconductor laser
Wavelength:
780 nm
General
Power supply:
DC input (via optional AC adaptor):
DC 4.5 V
Operational temperature range:
0 eC–40 eC
(32 eF–104 eF)
Play time:
Using on a flat stable surface at
25 eC (77 eF), EQ is off, Hold is on,
Anti-skip is on POS 1.
2 optional alkaline batteries:
About 50 hours
≥The play time may be less
depending on the operating
conditions.
≥Play time will be considerably
reduced when playing CD-RW.
Dimensions (WaHaD):
135a27.7a135 mm
(5 5 /
16 z a1 3 /
32 z a5 5 /
16 z
)
Mass: 213 g (7.5 oz.)
(with batteries)
168 g (5.9 oz.)
(without batteries)
Note:
Specifications are subject to
change without notice.
Mass and dimensions are
approximate.
Specifications
∫Batteries
≥Do not peel off the covering on the batteries and do not use if the covering has been peeled off.
≥Align the poles + and s correctly when inserting the batteries.
≥Do not mix different types of batteries or old and new batteries.
≥Remove the batteries if you do not intend to use the unit for a long time.
≥Do not throw into a fire, short-circuit, disassemble, or subject to excessive heat.
≥Do not attempt to recharge dry cell batteries.
≥When carrying batteries in a pocket or bag, ensure no metal objects such as necklaces are
placed together with them. Contact with metal may cause short-circuiting which can cause a
fire.
∫CDs
≥Do not use irregularly shaped CDs.
≥Do not use non-specification discs.
≥Do not use CDs printed with label printers available on the market.
≥Do not use CDs with labels and stickers that are coming off or with adhesive exuding from
under labels and stickers.
∫Listening
Do not play your headphones or earphones at a high volume. Hearing experts advise against
continuous extended play.
If you experience a ringing in your ears, reduce volume or discontinue use.
Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in
many areas.
You should use extreme caution or temporarily discontinue use in potentially hazardous
situations.
Even if your headphones or earphones are the open-air type designed to let you hear outside
sounds, don’t turn up the volume so high that you can’t hear what’s around you.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
≥Start your volume control at a low setting.
≥Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
≥Leave it there.
∫Allergies
Discontinue use if you experience discomfort with the earphones or any other parts that directly
contact your skin. Continued use may cause rashes or other allergic reactions.
Caution
EST. 1924
Enhanced
S-XBS
or
While paused
During play
Specified segment
repeat (AB segment)
( ➪below)
∫Specifying the AB segment
Press [MEMO] at the start point (A) and once more at the end point (B).
≥ Stop or skip ( ➪ page 3) to cancel.
≥ If you do not specify point B and reach the end of disc, point B is set
automatically and repeat begins. You can also specify point B again by
pressing [MEMO].
No display (canceled)