Panasonic KX-TA624 - Manual (Page 172)

3-116 Telephone Features
V
3.2 Telephone Features
Conditions
• Voice Mail can be assigned as the destination for the following features.
a) Call Forwarding — All Calls
b) Call Forwarding — Busy/No Answer
c) Intercept Routing
• Outside callers can leave messages in your mailbox. When an incoming outside call is
received, the operator answers the call and transfers it to your extension.
— If you set the “Call Forwarding” feature at the Voice Mail destination;
The call will be forwarded to Voice Mail automatically.
— If you do not set the “Call Forwarding” feature;
The call will return to the operator. Then the operator will transfer the call to Voice
Mail.
• An incoming call via DISA is automatically transferred to Voice Mail when the
destination extension is assigned to “Intercept” and a Voice Mail extension is assigned
as the Intercept Routing destination.
• You can also transfer the received outside calls to specific mailboxes so that callers can
leave messages.
• A flexible button can be assigned as the FWD/DND button.
• If you set the Call Forwarding — Busy/No Answer feature, the FWD/DND button light
will keep flashing. To stop this flashing, go off-hook and dial 716#.
• You will hear dial tone 3 if there are messages in your mailbox when you go off-hook.
When you access voice mail, you have to listen to all of the new messages. If you do
not listen to all of the messages, dial tone 3 will be eliminated and you will not know
there are messages left in your mailbox the next time you go off-hook.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — FWD/DND Button,
Return to Message Waiting (MESSAGE) Button
Feature References
Call Forwarding — All Calls, Busy/No Answer
Intercept Routing (
→
See the Installation Manual.)
SLT
PT
PT
By manual dialing
Any Telephone
Enter the Voice Mail extension number.
Voice Mail extension no.
Lift the handset or press SP-PHONE/MONITOR.
• You can listen to the stored message by
following the Voice Mail prompts.
• When you use an SLT, you will hear
dial tone 3 if there are messages.