Philips VR624CAT - Manual (Page 36)

POWER
EJECT
SPEED VCR/TV
VCR TV
CBL
/DBS
SLOW
ENTER
MEMORY
1 2 3
4 5 6
7 8 9
0
CH. VOL.
ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
MENU
STATUS
/EXIT
TIME
SEARCH CLEAR
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
SP=1 SLP=2
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
36 Timer Recording (cont’d)
8
Press the Number 1 button to record in SP speed or the
Number 2 button to record in SLP speed. (See the chart
below.) You cannot use the SPEED button at this time.
9
Press two Number buttons for the month and two
Number buttons for the day you want to record the pro-
gram. For example, for July 10, 2001, press 07, 10. The day of
the week and the year will appear automatically. (You cannot pro-
gram the VCR to record more than one year in advance.)
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
START DATE 07/10/01
TUE.
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
10
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED / PLEASE TURN OFF VCR FOR TIMER RECORDING
will appear on the screen briefly. (If PROGRAM NOT COMPLET-
ED appears, try again from step 1.)
11
Press the POWER button to turn off the VCR power. The
Timer light will appear on the display panel. The Timer light will
flash if there is no tape in the VCR.
If the timer recording will take place several hours or days from
now, you may use the VCR until time for the recording. Turn off the
VCR a few minutes before the recording starts. If you forget to turn
off the VCR, PLEASE TURN OFF VCR FOR TIMER RECORDING
flashes on your TV screen two minutes before a timer recording
starts. Press the CLEAR button to remove the message.
Cassette type / Playback Time
Tape Speed T160 T120 T60
SP (standard play) 2 hrs.
2 hrs. 1 hr.
40 mins.
LP (long play) 5 hrs.
4 hrs. 2 hrs.
(playback only) 20 mins.
SLP (super long play)
8 hrs. 6 hrs. 3 hrs.
Tape Speeds
This chart shows the recording/playback time for
three types of video cassettes (T160, T120, and
T60). There are three playback speeds: SP, LP, and
SLP. When recording, you can change the tape
speed (SP or SLP) using the SPEED button. You
cannot record in LP speed. You can play a tape
only in the speed in which you recorded it.
Turn off the VCR
for the recording.
Insert a tape in
the VCR.
Leave the Cable
Box/DBS on
(if applicable).
8
9
10 11