Philips TSU 3000 - Manual (Page 48)

User Guide
46
Using the Power Features
Operating Pronto NG with RF
By default, Pronto NG uses infrared (IR) signals to operate devices. IR signals
have an operating distance of approximately 30 ft (10 m).
IR signals
RF signals
Pronto NG RF Extender
However, you can choose to have Pronto NG working with radio frequency (RF)
signals to operate devices from a distance or from an adjacent room.
An RF Extender (not included) is therefore required.
The RFX6000 is an RF Extender that can be used in combination with
Pronto NG. The RF Extender receives RF signals from Pronto NG and converts them
into IR signals, sent out to the device. Therefore, the RF Extender has to be placed
near the device you are operating with the RF Extender’s sending eye pointed
towards the device.
IR signals
Pronto TSU3000v3 US 18-02-2004 16:02 Pagina 46