Panasonic SD WV-NW484S - Manual (Page 23)

23
5
Install the camera on the mounting
bracket.
Fix the camera onto the mounting
bracket using the four screws
(provided).
During installation, align the protrud-
ing part on the mounting bracket and
the indented part on the camera to fix
the position of the camera.
Make sure to tighten the screws used
for mounting the camera.
(M4:0.78 N·m) {8kgf·cm}
You can keep the camera waterproof
by firmly tightening the installation
screws.
......................................................................................................................... Note
• When using the embedded box,
run the cable as shown on the
right.
..............................................................................................................................
Mounting bracket
2 positioning convex parts
(left and right)
2 positioning concave parts
(left and right)
Camera body
Installation screws
Installation screws
Cable
Mounting bracket
Camera
Imbedded box