Paradyne COMSPHERE 3611 - Manual (Page 32)

Configuration Option Tables
4-5 3610-A2-GB48-50 September 1996
Table 4-1
(4 of 4)
MCMP Setup Configuration Options *
P1/2 FEPSh: Disab
Next Enab Disab Prev
Ports 1 and 2 FEP Port Sharing. Allows you to create an FEP port-sharing group consisting of Ports 1 and 2.
Enab 2 – FEP transmissions and controls pass through Port 1 to be broadcast onto the aggregate data stream and to
Port 2. Data to be received by the FEP comes from both the aggregate data stream and Port 2.
Disab – Disables the FEP port-sharing feature for Ports 1 and 2.
P3/4 FEPSh: Disab
Next Enab Disab Prev
Ports 3 and 4 FEP Port Sharing. Allows you to create an FEP port-sharing group consisting of Ports 3 and 4. This
configuration option will not appear if a 2-port MCMP/Flex is installed.
Enab 2 – FEP transmissions and controls pass through Port 3 to be broadcast onto the aggregate data stream and to
Port 4. Data to be received by the FEP comes from both the aggregate data stream and Port 4.
Disab – Disables the FEP port-sharing feature for Ports 3 and 4.
P5/6 FEPSh: Disab
Next Enab Disab Prev
Ports 5 and 6 FEP Port Sharing. Allows you to create an FEP port-sharing group consisting of Ports 5 and 6. This
configuration option will not appear if a 2-port MCMP/Flex is installed.
Enab 2 – FEP transmissions and controls pass through Port 5 to be broadcast onto the aggregate data stream and to
Port 6. Data to be received by to the FEP comes from both the aggregate data stream and Port 6.
Disab – Disables FEP port-sharing feature for Ports 5 and 6.
MCMP Bckup: MCMP
Next MCMP TDM Prev
MCMP Backup. Determines the mode for backup. Valid only when an ISDN or a Switched 56 digital DBM is installed.
MCMP – Enables backup in MCMP mode.
TDM – Enables backup in TDM mode. Results in FEP port sharing at the control; no aggregate switch with EBrdg. The
V.32 analog DBM is forced to TDM.
2 When enabled, the CTS lead is forced ON (high) for the odd-numbered port in the FEP port-sharing group.
* This table presents configuration options based on MUX Function set to MCMP.