Powerware 9150 - Manual (Page 33)

Installation
29 Powerware ® 9150 User’s Guide
:
www.powerware.com
Powerware 9150 Hardwired Terminations for Optional PDM
Wire Function
Terminal Upstream
Suggested Wire Size**
Conduit Connection
Input
Terminal
Position*
Upstream
Circuit Breaker
Suggested Wire Size**
Conduit Connection
(Entry Size)
Ground TB1-1 8 AWG
L1/A TB1-2 70A 4 AWG
1-3/4 2 access hole for
L2/B TB1-3 70A 4 AWG
1-3/4 access hole or
1-1/4 2 conduit
Neutral TB1-4 2 AWG
Output for PDM Wire Color
Ground TB1-6 Green/Yellow
L1/A TB1-7 Black
1-3/4 2 access hole for
L2/B TB1-8 Red
1-3/4 access hole or
1-1/4 2 conduit
Neutral TB1-9 White
*All terminal wire size ratings are 8 - 4 AWG, except TB1-4 is 8 - 1/0.
**Use 75
•C copper wire. Suggested wire size is based on 120/208 full load ratings applied to NEC Code Table 310-16.
NOTE Proper phase rotation must be observed.
1 2 3 4 6 7 8 9
Ground L1/A L2/B N Ground L1/A L2/B N
Input Output
Figure 11. Hardwired Terminal Blocks