Panasonic RX-ES23 EN - Manual (Page 6)

RQT7912
6
Use of Batteries
≥ If this unit is not used for a long period of time or is used
only from an AC power source, remove all the batteries
to prevent potential damage due to possible battery
leakage.
≥ Align the poles (+ and –) correctly when inserting the
batteries.
≥ Do not mix old and new batteries or different types of
batteries.
≥ Do not recharge ordinary dry cell batteries.
≥ Do not heat or disassemble the batteries. Keep them away
from flame or water.
≥ Do not keep together with metallic objects such as
necklaces.
≥ Do not use rechargeable type batteries.
≥ Do not use batteries if the covering has peeled off.
Mishandling of batteries can damage other items, cause
damage to the unit, and may cause a fire through
short-circuiting or electrolyte leakage.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with
any part of your body.
Power Sources
To operate the unit on AC power (1)
Connect the AC mains lead.
1: Household AC outlet
2: AC mains lead (included)
To use batteries (not included) (2)
Disconnect the AC mains lead from unit to operate on battery
power.
The remote control cannot turn the unit on when batteries are
used.
To remove the batteries [A]
Open the battery cover, insert a finger into the hole in the
bottom of the unit and push the batteries out.
Memory Batteries
Memory batteries retain memory (clock/timer/CD/radio
settings) during power supply interruption.
These batteries do not power the unit.
* Memory batteries are not included.
To replace the batteries (3)
≥ The memory batteries last for about 1 year.
≥ Connect the unit to AC power before replacing the batteries.
≥ Extend the memory battery life by always pressing [ ] to
turn the unit off before disconnecting the unit from the AC
power source or replacing the power batteries.
To remove the batteries (4)
Lift the negative end of the number 4 battery to remove
batteries.
FOR THE UNITED KINGDOM ONLY.
READ THE CAUTION FOR THE AC MAINS LEAD ON
PAGE 3 BEFORE CONNECTION.
Battery life
“ ” flashes on the display when the batteries are
running down.
Then, the unit turns itself off and displays “U01”.
Replace all the batteries with new ones.
(1)
AC IN
1
2
2 1
3
4
(3)
(R6/LR6, AA, UM-3)
(R20/LR20, D, UM-1)
5
1 2 4 3
6
8
7
(2)
[A]
(4)
1
2
4
3
E_EB_GN_RQT7912-B.book 6 ページ ２００４年１２月８日 水曜日 午後４時１５分