Polaroid PDV-1002A - Manual (Page 17)

- 17 -
Power Supply
Attaching The Battery Pack
The player’s power is supplied via the switching power adapter or the battery pack,
which are provided with the player. Steps for connecting the battery pack to the player
are as follows:
Attaching the Battery Pack
Turn the player upside down on a smooth, clean
surface. Direct the battery so that the battery
contacts and the five plastic tabs are aligned with
the matching contacts and tab recesses on the
player.
Lock the Battery Pack
With one hand on the player to prevent it from
moving, push the battery pack on to the player
then slide the Battery Pack toward the front of
the Player until you hear it click and lock into
place.
Charging The Battery Pack
Plug the Power Adapter into the Player’s DC-IN
12 V Jack, which is located on Right Side of the
player, and then plug the other end of the Power
Cord into a household wall Power Outlet.
See the right figure.
Detaching The Battery Pack
If the player is not going to be used for a long period of time, we recommend that you
detach the Battery Pack. Even if the unit is powered down, the unit is still consuming
some power in STANDBY mode. This could lead to discharging the battery.
Make sure the power is turned off before detaching the Battery Pack. After detaching
the battery pack, take care when handling the unit.
1. Hold player in position so it doesn’t slide.
Press the tab towards the front of the unit and hold
it in the position.
2. Taking off the Battery Pack
Gently slide the Battery Pack toward the back of
the Unit. Carefully lift the Battery Pack from your
player.