ProForm Crosswalk PFTL56007.0 - Manual (Page 7)

3. Attach two Base Pads (82) to the Base (108)
with two 1" Tek Screws (83) as shown.
Insert an Extension Leg (89) into the Base (108)
as shown. Hold two Extension Leg Nuts (67) in
the bottom of the Extension Leg. Next, insert
two Extension Leg Bolts (65) into the top of the
Extension Leg, and firmly tighten the Extension
Leg Bolts into the Extension Leg Nuts.
3
89
82
82
108
83
65
67
4. With the help of a second person, carefully tip
the treadmill onto its other side. Partially fold the
Frame (58) so the treadmill is more stable.
Do
not fully fold the Frame until the treadmill is
completely assembled.
Attach the Left Upright (84) to the Base (108)
with a 1" Upright Bolt (106), a 2 3/4" Upright Bolt
(105), and two 3/8" Star Washers (23).
Do not
fully tighten the Upright Bolts yet.
4
108
58
84
106
23
105
7
2. Hold the Right Upright (107) against the Base
(108). Be careful not to pinch the Wire
Harness (77).
Attach the Right Upright (107) to the Base (108)
with a 1" Upright Bolt (106), a 2 3/4" Upright Bolt
(105), and two 3/8" Star Washers (23).
Do not
fully tighten the Upright Bolts yet.
2
23
77
107
105
106
108