Pirelli DISCUS DP-L10 - Manual (Page 63)

Chapter
63
5
Settings
Active settings : Select and set the profile. You can also clear the profile in the
Options page by selecting Clear profile .
5.3.1 Configuring a new E-mail account
Through this menu you can set a new service account based on the
parameters provided by your service provider:
 Mailbox name : can be set as desired
 E-mail address : input here the e-mail address (e.g. [email protected] )
 My name : Input the name before @, e.g. Mark
 Out SMTP server : the SMTP server address for outgoing mail; (e.g.
smtp.yahoo.com)
 In POP3 serve : the POP3 server address for incoming mail; (e.g.
POP3.yahoo.com)
 POP3 user name : typically coincides with the e-mail address or with
the user part of the address
 POP3 password : input the password for mail access (appears as
‘******’)
 Leave copy : <on> leaves a copy of the downloaded mails on the
server for successive access (e.g. from a PC); <off> disables this
option. Warning: all mails downloaded to the phone will only be
readable via the phone menu.
 Polling interval : ‘manual’ enables the manual retrieve of mails
‘5 minutes’ (automatic retrieve every 5 min)
‘30 minutes’ (automatic retrieve every 30 min)
‘60 minutes’ (automatic retrieve every 60 min)
‘2 hours’ (automatic retrieve every 2 hours)
‘3 hours’ (automatic retrieve every 3 hours)
‘4 hours’ (automatic retrieve every 4 hours)
‘12 hours’ (automatic retrieve every 12 hours)
 Other settings
 Incl. Signature
 Use SMTP auth : (<yes> enables authentication on the SMTP server)
 SMTP user name : (to be input if <yes> was selected in the previous
menu)
 SMTP password : (to be input if <yes> was selected in the previous
menu)