Auxiliary control, Alarm control function, Alarm suspension – Panasonic WJ-FS616C User Manual
Page 73
74
●
Auxiliary Control
The following function is available only with a system that
includes WV-RC100 or WV-RC150 Receivers.
1. Select the desired monitor and camera referring to the
Camera Selection procedure described above.
2. While the ALT indicator is on, press the [HOME/–] or
[AUTO/+] button to toggle the user’s auxiliary switch in
the receiver on and off.
Note:
The auxiliary control is not available while operat-
ing the zoom or pan/tilt head.
Alarm Control Function
■
Alarm Suspension
This function disables activation of the alarm link and
instead enables storing of any alarm activated in the alarm
log.
It is used to suspend the alarm link during camera setup.
To suspend the alarm:
1. Press the [RESET] and [EL-ZOOM] buttons at the time
for 2 seconds or more to suspend the alarm.
The indicator in the RESET button lights.
2. Press the [RESET] button to reset the alarm suspension.
The indicator in the RESET button goes off.
ALT
HOME/–
AUX1 AUX2
AUTO/+
RESET
EL-
ZOOM
ALL FS
RESET