Philips AS140 - Manual (Page 24)

23
English
EN
6 Other features
Set time
1
Press to switch the docking system to
standby mode.
2
Press and hold SET TIME for two seconds.
» The hour and minute digits begin to
blink.
3
Press / and / repeatedly to set
the hour and minute.
4
Press SET TIME WR FRQÀUP
» [12H] or [24H] begins to blink.
5
Press / to select 12/24 hour format.
6
Press SET TIME WR FRQÀUP
» The set time is displayed.
Set alarm timer
Set alarm
In standby mode, you can set two alarms to ring
at different time.
Note
‡ Make sure that you have set the clock correctly.
1
Press and hold AL1/AL2 for two seconds
to activate alarm setting mode.
» The hour and minute digits begin to
blink.
2
Press / and / repeatedly to set
the hour and minute.
3
Press AL1/AL2 WR FRQÀUP
Select alarm source
Note
‡ For alarm sound, you can select buzzer, your last
listened radio chanel, or the latest played track in your
Android-powered device.
Adjust AL1/AL2 RADIO·BUZZ·DOCK
control to select alarm source for both alarms.
Note
‡ If DOCK is selected as alarm source, make sure that
you have docked your device into the docking system.
Activate/deactivate alarm timer
1
Press AL1/AL2 to view alarm settings.
2
Press AL1/AL2 again to activate or
deactivate the alarm timer.
» The alarm icon appears if alarm timer
is on and disappears if it is off.
‡ To stop the ringing alarm, press the
corresponding AL1/AL2.
» The alarm repeats ringing for the next
day.
Snooze alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing
nine minutes later.
Set sleep timer
This docking system can switch to standby
mode automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
appears.