Pioneer BDP-V6000 - Manual (Page 21)

21
En
03
Connecting video and
audio cables
Note
• Make the settings in the Setup Navigator menu
acco rding to the type of cable connected (page 23).
• To out put video signals from this player, connect
using one of the following (not including when
connected using an HDMI cable): a com
ponent video
cable o r a video cable.
Connecting a TV using a
video/audio cable
Caution
• Connect the player’s video output directly to
your TV.
This
player supports analog copy protection
technology. The refore the picture may not be
dis played properly if connected to a TV via a DVD
recorder/video deck or when playing the player’s
out
put material that is recorded by a DVD recorder/
video deck. Fu rthermore, the picture may not be
dis played properly due to the copy protection when
the player is connected to a TV with a built-in video
deck. Fo r details, contact the manufacturer of your
TV.
Note
• Video signals a re output with a resolution of 480/60i
o r 576/50i when connected using a video cable.
• When connected to the TV using a com ponent video
cable, video signals a re not output with a resolution of
1080/60 p, 1080/24p 1080/50i, 1080/50p or 720/50p.
• De pending on the output video resolution setting, the
picture may not be output (page 27).
Connecting an AV receiver or
amplifier using audio cables
When connecting to a 7.1-channel compatible AV
receiver or amplifier – Connect using 4 audio cables
(diag
ram below).
When connecting to a 5.1-channel compatible AV
receiver or amplifier – Connect using 3 audio cables (do
not connect to the su
rround back left and right
te rminals).
• To switch the video f rom the AV receiver or amplifier,
also connect the video out put terminals.
• Afte r connecting, set Audio Output Mode to Multi-
channel (page 43).
Note
• To connect to the 2-channel audio in put terminals on
a TV, etc., connect to FRONT (L/R).
Connecting components
to the USB port
The data downloaded with the BD-LIVE function and the
data used with the BONUSVIEW function when
playing
BD-ROMs can be sto red on a device connected to the
USB port (external storage).
About USB (external storage)
devices
The USB (exte rnal storage) devices that can be
connected to the player are as shown below.
• USB 2.0-com patible memory devices or hard disks
• FAT16 o r FAT32 file system, minimum 1 GB capacity
(2 GB o r more recommended)
AUDIO OUT(7.1 ch)
CONTROL
IN
VIDEO
OUT
VIDEO
FRONT SURROUND SURROUND BACK
COMPONENT VIDEO CENTER SUB WOOFER
L
Y
P B
P R R
L
R
AUDIO OUT(7.1 ch)
CONTROL
IN
VIDEO
OUT
VIDEO
FRONT SURROUND SURROUND BACK
COMPONENT VIDEO CENTER SUB WOOFER
L
Y
P B
P R R
L
R
TV
Playe r’s rear panel
To com ponent
video in put terminals
A com ponent
cable o r three
comme rcially
available video
cables can be
used instead of
the video cable
(yellow
plug) of
the included
video/audio cable
fo
r connection.
Di rection of signal flow
Red
White
It is also possible to connect to
an AV receiver or amplifier.
Connect the audio signals
using audio cables (7.1
channels) o
r an optical digital
audio cable (below).
To video/audio
in put terminals
Video/audio c
a
ble (includ
e
d
)
Yellow
AUDIO OUT(7.1 ch)
CONTROL
IN
VIDEO
OUT
VIDEO
FRONT SURROUND SURROUND BACK
COMPONENT VIDEO CENTER SUB WOOFER
L
Y
P B
P R R
L
R
DIGITAL OUT
OPTICAL
DIGITAL OUT
OPTICAL AUDIO OUT(7.1 ch)
CONTROL
IN
VIDEO
OUT
VIDEO
FRONT SURROUND SURROUND BACK
COMPONENT VIDEO CENTER SUB WOOFER
L
Y
P B
P R R
L
R
Playe r’s rear panel
To multi-channel audio
in
put terminals
AV receiver or
am plifier
Video/aud
io
cable (inc
luded)
Re
d Wh
it
e
A
udio c
a
ble
(comm
e
rc
ially
availa
b
le
)
Di rection of signal flow
An o
p
tic
a
l digital
audio
ca
bl
e
(
c
om
me
rc
ially
av
ailable) ca
n
also be
used fo
r c
onnec
tion.
To o ptical digital
audio in put
te rminal
A
udio c
a
ble
(comm
e
rc
ially
availa
b
le
)
A
udio c
a
ble
(comm
e
rc
ially
availa
b
le
)
V6000_CUXJ_EN.book 21 ページ ２００９年６月５日 金曜日 午前１１時５７分