Specifications, Highlights – Philips WP3892/01 User Manual
Page 2
Issue date 2010-12-24
Version: 8.1.1
12 NC: 0000 000 00000
© 2010 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Specifications
WP3892/01
UV water purifier
UV Class A Intellifill
Highlights
Power UV+
Advanced state-of-the-art UV (PLS) technology
destroys known waterborne viruses,
bacteria,parasites and amoebae while the activated
carbon and sediment filter removes turbidity,
chlorine, volatile organic chemicals (VOCs), cysts,
larger micro-organisms and improves taste.
IntelliFill
When the purifier senses water pressure, IntelliFill
will start purifying and dispensing water up to the
amount you have set. This way, available water is
purified, even when you are away or asleep, and you
will always be sure of having enough pure water
when you need it.
PureProtect alert
After 2700 litres of water consumption, PureProtect
alert sends out a signal. There will still be enough
capacity for another 300 litres after the signal.
Tilt and Twist
Replacing the filter is something you can easily do
yourself thanks to the simple Tilt and Twist
mechanism.
Certified by BIS
Product is certified according to microbiological
performance standard BIS 14724 and Drinking water
standard BIS 10500 by the Bureau of Indian
Standards
Gold Seal by Water Quality Association
(WQA), USA
WQA (Water Quality Association, USA) only
awards the Gold Seal to those systems, components
or additives that have met or exceeded industry
standards for contaminant reduction, structural
integrity and material safety. This product is certified
by WQA to conform to NSF/ANSI 42 for the
removal of chlorine and particulates (removes all
classes of particulates from Class I till Class VI -
particle size 0.5µm till 80 µm), NSF/ANSI 53 for the
removal of turbidity, volatile organic chemicals
(VOCs) and cysts and NSF/ANSI 55 Class A for
microbiological dis-infection.
Tested by KIWA Water Research, The
Netherlands
Tested by Kiwa Water Research: Microbiological
performance tested by Kiwa Water Research (The
Netherlands) according to the NSF standard 55,
Class A protocol (2004).
General specifications
• Frequency: 50 Hz
• Voltage: 220-240 V
• Water flow rate: max 1.2 l/min
• Power rating: 25 W
Design specifications
• Product weight: 3.8 kg
• Product dimensions (L x W x H): 287 x 156 x
422 mm
Purification system
• PLS UV lamp: 9 W
Water input conditions
• Max. input water temperature: 45 °C
• Max. input water pressure: 2.0 Bar
• Min. input water pressure: 0.5 Bar
• Min. input water temperature: 5 °C
•