Paradyne 3980-A2-GZ40-20 - Manual (Page 4)

4 November 1996 3980-A2-GZ40-20
SDC User Interface
When SDC is enabled, the following configuration options are available to set up the SDC feature. Some of the
configuration options are not displayed unless SDC is enabled.
V.42/MNP/Buffer (see Table 1)
•
Sync Comp Mode
•
SDC Negotiation
•
SDC Idle Fill
•
SDC Bit Encoding
•
Sync DTE CRC
•
SDC Delay Min
•
Sync Flow Control
•
TX Buff Disc Delay
•
RX Buff Disc Delay
•
Max Frame Size
•
Cellular Enhance
DTE Interface (see Table 2)
•
Sync DTE Rate
•
Tx Clock Source