Display option menu, Color matching, Color correction – Panasonic PT-DZ6710 User Manual

Page 25: Contrast mode, Screen setting, Auto signal, Color correction contrast mode, Screen setting auto signal, Nglish - 25, Jscreen format

Advertising
background image

E

NGLISH - 25

Settings

DISPLAY OPTION menu

(Not available for PT-D5000)
When multiple projectors are used simultaneously, you can
adjust the difference of the colours. Press I H to cycle
through the options.

You can adjust 6 colours and register the result for each of 4
types of signals, VIDEO, S-VIDEO, RGB and YP

B

P

R

/YC

B

C

R

.

(Not available for PT-D5000)
You can switch the contrast mode for operating environment.

J

SCREEN FORMAT

Select the required screen format by pressing I H. The
SCREEN FORMAT setting will affect on the ASPECT
setting. See “ASPECT” on page 18.

J

SCREEN POSITION

You can change the displaying position of the projecting
area. Press I H to adjust the value.

You can turn ON/OFF automatically detecting system of the
AUTO SETUP feature.

COLOR MATCHING

OFF

Deactive.

3 COLORS

Adjusting RGB gain of RED, GREEN, BLUE
and WHITE. Press I H to change the value
and switch ON/OFF the AUTO TEST
PATTERN
.
Setting range: 0 to +2048
(Setting value depends on your selected colours.)

7 COLORS

Adjusting RGB gain of RED, GREEN,
BLUE, CYAN, MAGENTA, YELLOW and
WHITE. Press I H to change the value and
switch ON/OFF the AUTO TEST PATTERN.
Setting range: 0 to +2048
(Setting value depends on your selected colours.)

MEASURED

Adjusting colours based on measured
values using colorimeter. Input measured
result in MEASURED DATA, and adjust in
TARGET DATA. Press I H to change the
value and switch ON/OFF the AUTO TEST
PATTERN
.

PICTURE MODE in PICTURE menu
need to be set to DYNAMIC for using
colorimeter.

NOTE:

• If the TARGET DATA is outside the colour range of the

projector, the colours will not be projected correctly.

• When each colour option is selected while AUTO TEST

PATTERN is activated, its one colour pattern will be displayed.

• Adjusting red gain of red colour changes its luminance, and

likewise blue gain of blue and green gain of green.

• COLOR MATCHING adjustment should be carried out by a

person who is familiar with the projector or by a service person
because a high level of skill is required to make successful
adjustment.

• Press the DEFAULT button to restore the factory default

settings.

• AI, COLOR CORRECTION and COLOR TEMPERATURE are

not available with COLOR MATCHING.

Remote control

See “Navigating through the menu” on page 15.

See “Main menu and Sub-menu” on page 12.

COLOR CORRECTION

OFF

Deactive

USER

Adjust 6 colours, RED, GREEN,
BLUE, CYAN, MAGENTA and
YELLOW.

CONTRAST MODE

NORMAL

Maximum brightness

HIGH

Maximum contrast

SCREEN SETTING

PT-DZ6710/PT-DZ6700

16:10

*1

H 16:9 H 4:3

*1. SCREEN POSITION is not available.

PT-DW6300

16:10

*1

H 16:9

PT-D6000/PT-D5000

4:3

*1

H 16:9

PT-DZ6710/PT-DZ6700

Setting range:
16:10

Not available.

16:9

-60 to +60

4:3

-160 to +160

PT-DW6300

Setting range:
16:10

Not available.

16:9

-40 to +40

PT-D6000/PT-D5000

Setting range:
4:3

Not available.

16:9

-96 to +96

AUTO SIGNAL

OFF

Only when the AUTO SETUP button is
pressed, the projected image position
will be adjusted.

ON

When the projector detects a
COMPUTER or DVI signal, adjust the
projected image position automatically.

Advertising
This manual is related to the following products: