Panasonic PT-DZ6710 - Manual (Page 39)

Technical Information
E
NGLISH - 39
Appendix
J Projector Control Window
1. Activate the web browser of the computer.
2. Enter the IP ADDRESS set by the projector into the URL
input field of the web browser.
See “NETWORK STATUS” on page 37.
3. Enter your user name and password.
The factory default settings are “user1” (user privileges) or
“admin
1” (administrator privileges) for the user name and
panasonic (lowercase) for the password.
4. Click OK and display the Projector Control Window.
5. Click the required item button on the left.
J Change password
Q Administrator mode
1. Select Administrator to change and click NEXT.
2. Enter User name and Password.
Accessing with the web browser
NOTE:
• Avoid activating two or more web browser
simultaneously to work out setting or control actions.
• Change the password first of all.
• Administrator privileges enable the use of all functions.
User privileges enable the use of only Projector
status, Error information, Network status, Basic
control, and Change password.
• If the password is incorrectly entered three times in a
row, the lock is set for several minutes.
Administrator account
Current setting
User name Enter the current user name.
Password
Enter the current password for the
user name.
New setting
User name Enter new user name.
Password Enter new password.
Password(Retype) Enter the new password again.