Philips Speed-XL 8170XLCC - Manual (Page 12)

ENGLISH 12
Jet Clean & Charge
Model 8170XLCC Only
◗ See separate Jet Clean & Charge instruction
book for complete charging and cleaning
instructions.
Model 8170XL Only
◗ Do not leave the razor continuously plugged
into outlet charging as it would reduce life of
batteries. Remove the plug from outlet as
soon as the razor is fully charged.
C
1 Connect cord directly to razor; connect
the charging plug into any 100V to 240V
AC outlet. Use only the charging plug
provided.
C
As you charge razor, the bottom light on the
display blinks red. After a few minutes, it will then
turn green and blink. As charging continues, more
and more lights of the display meter will briefly
blink green and light up to indicate what level of
the batteries have been charged.
◗ An adaptor plug may be necessary for
charging plug usage in some foreign countries.
Use an attachment plug adaptor of the proper
configuration for the power outlet.
The charging plug will automatically convert to
work on 100V to 240V AC systems.
8170XLDFU-01_31_05Norelco.qxd 2/11/05 3:56 PM Page 12 (Zwart plate)