Panasonic SL-SX391C - Manual (Page 4)

4
Other Play Methods
Skip play
The disc plays from the specified track through to the
end, then play stops automatically.
Preparation: Put unit in stop mode.
1
Select the desired track.
2
Changing the sound quality
Press during play or stop mode.
The setting switches in the sequence indicated below
each time [EQ] is pressed.
S-XBS >TRAIN>Cancel (no indicator is shown)
^==========b
S-XBS:
Select this setting to boost the low-range response.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your headphones/earphones while rid-
ing on the train, or to reduce fatigue when listening for a
long period of time.
Note !
The setting returns to S-XBS when you disconnect the
power source.
The letters such as B in the various illustrations refer to the descriptions in the “Location of Controls” section (see page 2).
B
H
This system deals with skipping in a variety
of ways:
≥ An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
≥ A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.
≥ An anti skip memory (max. 48seconds) fills in interrup-
tions caused by bumps and vibrations.
The anti-skip system works automatically while the
system is on and cannot be canceled.
When bumps continue repeatedly
The elapsed playing time disappears and sound is inter-
rupted.
Anti-Skip System
E
S-XBS TRAIN
RANDOM
VOL
1 M
C
Repeat play/Random play
Press during play or stop mode.
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `) ( ----------------]
One track is repeated. |
v |
All-track repeat (`) |
All the tracks on the disc are repeated. |
v |
Random (RANDOM) |
The tracks play once each in random |
order and then play stops. |
v |
Random repeat (RANDOM `) |
The tracks play repeatedly in random |
order. |
v |
Cancel (no indicator is shown) --------------}
When pressed during program play
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 ` M) (------------]
One track is repeated. |
v |
Memory repeat (` M) |
The programmed tracks are repeated. |
v |
Cancel ( M ) -------------------------------------------}
Note !
≥ You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥ You cannot select random play or random repeat play
during program play.
≥ The resume function does not work when random or
random repeat are on.
≥ The mode is canceled when you disconnect the power
source.
F
MODE
D
EQ
Program play
Up to 24 tracks can be entered in the programmed se-
quence.
Preparation: Put unit in stop mode.
1
Select the desired track.
2
Register in sequence.
(The indication “M” and the programmed se-
quence appear on the display.)
3
Repeat steps 1 and 2 to program all
the desired tracks.
4
∫ To program the same track in the se-
quence more than once
∫ After step 2, press [MEMORY/RECALL] desired
number of times.
∫ If “'” is displayed
∫ No more tracks can be programmed.
∫ To confirm the contents of the program
∫ Press [MEMORY/RECALL] while the disc is playing.
(The numbers of the programmed tracks appear on
the display in sequence.)
∫ To delete the entire programmed se-
quence
∫ Press [∫].
Note !
The repeat and random play modes are canceled after
steps 1 and 2.
B
G
MEMORY/RECALL
H
Note !
≥ While the system is on, the disc rotates at a higher
rate than usual in collecting extra audio data. This
could result in a slight increase in disc rotation noise.
≥ The anti-skip memory compresses digital signals.