Philips 855 - Manual (Page 52)

The System 49
16 The System
16.1 Set your country
The country setting of your phone has
been set during the initial set up of your
phone. You can make changes to the
country setting on your phone. The
country code is the international calling
code for a country (example, “1” for
Canada), see “Country codes list” on
page 52.
Please refer to glossary for details about
country code, see page 64.
Press Menu .
Select Settings > Advanced >
Country . Press Select .
Select the new setting. Press OK .
• The setting is saved.
Warning
The phone may not work properly
without correct country code entry.
16.2 Register the handset
Registration allows communication
between the base unit and handset(s). If
the handset cannot communicate with its
base, you will not be able to make any call
or use many of the functions and features
on the phone.
Note
Your handset should be already
registered on the base unless you have
de-registered a handset.
Warning
Make sure you have configured the
language, country code, and area code of
your phone before registering additional
handsets.
16.2.1 Manual Registration
Press Menu > Settings > Phone >
Registration .
Press the Base page key for more
than 3 seconds.
Press
OK on the handset.
Enter PIN code (Default: 0000).
Press
Clear to correct typing errors.
Press OK .
• Your handset starts searching for
the base.
• If registration is successful, the signal
icon displays steadily.
Tip
If registration failed, repeat the above
procedure.
Note
The base can register up to 4 handsets,
then the base unit registration memory is
full. If you attempt to register an
additional handset, the registration
process will be aborted.
16.3 Unregister a handset
Use one handset to unregister another
handset that shares the same base unit.
Press Menu .
Select Settings > Phone >
De-registration . Press OK .
Select the new setting. Press OK .
Tip
The handset number displays beside the
word “Skype” during standby. For
example, Skype (1).
1
2
3
!
!
1
2
3
4
5
1
2
3