Philips 855 - Manual (Page 15)

12 Getting started
3 Getting started
3.1 Connect the base station
Connect the output plug of the
mains adapter to the bottom of the
base station and the mains adapter
to a standard wall outlet.
Connect one end of the ethernet
cable to the ethernet socket on the
bottom of the base station and the
other end to an ADSL/Cable modem
or a router or a switch/hub
connected to the Internet.
Connect the telephone line cord to
the phone socket at the bottom of
the base station and the wall phone
socket.
3.2 Connect your charger
Connect the mains adapter to a
standard wall outlet.
3.3 Install your handset
Warning
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
Never use non-rechargeable batteries.
Use recommended type supplied with
this product. NiMH batteries must be
disposed of in accordance with the
applicable waste disposal regulations.
Note
Charge the handset(s) for 24 hours
before initial use!
The batteries are pre-installed in
your handset. Before charging,
remove the pull-tape.
Place the handset on the charger.
When the handset is placed
correctly in its charging position, a
tone will be emitted and the battery
icon will scroll
, indicating
that the battery is charging. Once
the battery is fully charged, the
battery icon
will appear
steadily.
1
2
3
1
!
1
2