Panasonic SV-P10U - Manual (Page 6)

6
Quick Guide
For details, read the respective pages shown in the brackets.
1 Insert the ink cassette with a blue guide
fitted. (
l l l l 10)
≥If the ink sheet is loosened, tighten it before use.
2 Insert a card storing picture data. ( l l l l 10)
3 Hold down the Power Button [ ] for about
2 seconds. ( l l l l 11)
≥Turn on the SD Mobile Printer.
4 When the information contained in the card
is completed to be read, the [PRINT] Lamp
lights. (
l l l l 11)
5 Insert a sheet of paper with the [ ª/[1]/[4] ]
mark side down into the [PAPER IN 1 ] slot
(Upper slot). ( l l l l 11)
6 After printing, hold down the Power Button
[ ] for about 2 seconds. ( l l l l 18)
≥Turn off the SD Mobile Printer.
ª Lamp indication list
*At a low temperature, the Printer stops operating for one to two minutes after drawing the paper in to heat itself. Wait until
the temperature rises.
Status/Lamp
The power is turned ON. Lights.
The battery will run down shortly. Flashes.
Charging. Flashes.
The 4-Picture mode is selected. Lights.
Printing is ready.
Insert a sheet of paper to start printing. Lights.
Pre-heating at a low temperature* Lights.
Printing... Flashes.
No ink cassette Flashes.
Ink runs down. Flashes.
Accessing a card. Lights.
Battery error Flashes. Flashes.
Temperature error
(Wait until the temperature lowers.)
Lights. Flashes.
Paper jamming Flashes. Flashes.
The card cannot be used. Flashes. Flashes.
No image data on the card Flashes. Flashes.
The battery temperature is too high.
(Wait a while.) Flashes. Lights.
External light error (Reorient the Printer.) Flashes. Flashes.
Failure (hardware error) Lights. Lights.
Lights.