Philips FWD14 - Manual (Page 13)

14
4 Get started
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
1
Open the battery compartment.
2
Insert 2 AAA batteries (not supplied)
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
Risk of explosion! Keep batteries away from ‡
KHDWVXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHV
LQÀUH
Remove batteries if they are exhausted or if
‡
the remote control is not to be used for a long
time.
Do not mix batteries (old and new or carbon
‡
and alkaline, etc.).
Batteries contain chemical substances, so they
‡
should be disposed of properly.
3
 5HOHDVHWKHVRFNHWÁDS
Connect power
Caution
Risk of product damage! Ensure that the ‡
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
Risk of electric shock! When you unplug the
‡
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure
‡
you have completed all other connections.
1
Connect the power cord to the wall
outlet.
a b c
EN