Panasonic NV-FJ600 - Manual (Page 16)

16
Option Setting
To Select the Corresponding Video
Cassette Tape Length to Display the
Approximate Remaining Tape Time
(TAPE SELECT)
1 Press the MENU button V to
display the Main menu on the
TV screen.
2 Press the Cursor buttons (34 34 34 34 34 ) T
to select “OPTION” then press the
ENTER button U.
3 Press the Cursor buttons (34 34 34 34 34 ) T
to select “TAPE SELECT” then
select the corresponding video
cassette tape length by pressing
the Cursor buttons (2 1
2 1 2 1 2 1 2 1 ) T.
E180: For E30, -60, -90, -120, -150 and -180 tapes.
E195: For E195 tape.
E240: For E240 tape.
E260: For E260 and -300 tapes.
≥ The remaining tape time may not be displayed correctly
depending on the tape used.
4 Press the MENU button V twice to exit the On Screen
Display.
To Select the Colour TV System of the TV
Used to Record NTSC Signals
Follow steps 1 to 2 of TAPE SELECT.
3
Press the Cursor buttons (34 34 34 34 34 ) T
to select “NTSC INPUT SELECT”
then select “AUTO” by pressing the
Cursor buttons (2 1
2 1 2 1 2 1 2 1 ) T.
Allows NTSC “4.43” or “3.58”
signals to be distinguished
automatically.
≥ If the tape has not recorded
correctly, select 4.43 or 3.58.
4.43: When recording NTSC 4.43 signals.
3.58: When recording NTSC 3.58 signals.
Some programmes on NTSC 3.58 system
cannot be recorded correctly at this position.
4 Press the MENU button V twice to exit the On Screen
Display.
To Select the Colour TV System of the TV
Used to Play Back a Tape Recording NTSC
Signals
Follow steps 1 to 2 of TAPE SELECT.
3
Press the Cursor buttons (34 34 34 34 34 ) T
to select “NTSC PB SELECT” then
select the desired position
according to the colour TV system
of the TV by pressing the Cursor
buttons (2 1
2 1 2 1 2 1 2 1 ) T.
on PAL TV: For TVs that can receive PAL signals.
4.43:
For TVs that can receive NTSC 4.43 signals.
3.58: For TVs that can receive NTSC 3.58 signals.
4 Press the MENU button V twice to exit the On Screen
Display.
To Play a NTSC Game on PAL System TV
Follow steps 1 to 2 of TAPE SELECT.
3
Press the Cursor buttons (34 34 34 34 34 ) T
to select “NTSC CONVERTER” then
select “ON” or “OFF” by pressing the
Cursor buttons (2 1
2 1 2 1 2 1 2 1 ) T.
OFF: Initially set at this position.
ON: PAL TV can receive
signals from NTSC 3.58
signal source (e.g., NTSC
game machines.)
connected to the VCR
main unit. However, when
recording, this function
does not work.
≥ When receiving NTSC 4.43 signals, this function does
not work correctly.
4 Press the MENU button V twice to exit the On Screen
Display.
END :MENU
NTSC INPUT SELECT (AUTO)
NTSC PB SELECT (onPALTV)
TAPE SELECT (E180)
SELECT:
NTSC CONVERTER (OFF)
POWER SAVE (OFF)
DIRECT REC (OFF)
OPTION
END :MENU
NTSC INPUT SELECT (AUTO)
NTSC PB SELECT (onPALTV)
TAPE SELECT (E180)
SELECT:
NTSC CONVERTER (ON)
POWER SAVE (OFF)
DIRECT REC (OFF)
OPTION
END :MENU
NTSC INPUT SELECT (AUTO)
NTSC PB SELECT (onPALTV)
TAPE SELECT (E180)
SELECT:
NTSC CONVERTER (OFF)
POWER SAVE (OFF)
DIRECT REC (OFF)
OPTION
END :MENU
NTSC INPUT SELECT (AUTO)
NTSC PB SELECT (onPALTV)
TAPE SELECT (E180)
SELECT:
NTSC CONVERTER (OFF)
POWER SAVE (OFF)
DIRECT REC (OFF)
OPTION
END :MENU
NTSC INPUT SELECT (AUTO)
NTSC PB SELECT (onPALTV)
TAPE SELECT (E180)
SELECT:
NTSC CONVERTER (OFF)
POWER SAVE (OFF)
DIRECT REC (OFF)
OPTION
END :MENU
NTSC INPUT SELECT (AUTO)
NTSC PB SELECT (onPALTV)
TAPE SELECT (E180)
SELECT:
NTSC CONVERTER (OFF)
POWER SAVE (OFF)
DIRECT REC (OFF)
OPTION
END :MENU
NTSC INPUT SELECT (AUTO)
NTSC PB SELECT (onPALTV)
TAPE SELECT (E180)
SELECT:
NTSC CONVERTER (OFF)
POWER SAVE (OFF)
DIRECT REC (OFF)
OPTION
END :MENU
NTSC INPUT SELECT (AUTO)
NTSC PB SELECT (onPALTV)
TAPE SELECT (E195)
SELECT:
NTSC CONVERTER (OFF)
POWER SAVE (OFF)
DIRECT REC (OFF)
OPTION
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
SELECT
END : ,ENTER
:MENU
MENU
On Screen Display