Panasonic CQ-VD7005U - Manual (Page 33)

32
33 CQ-VD7005U
English
MEMORY CLEAR
Memory clearance
The state of all of the current memories are returned to
default settings.
Note:
¡
The ID code is not deleted by executing memory clear.
: clears the memory to default settings
: no memory clear.
The display returns to the previous one.
appears when
is selected.
: proceed.
: no memory clear. CANCEL
OK
YES
REALLY?
NO
YES
OTHER
Other settings
: operation sound (beep) ON
: operation sound (beep) OFF
default: ON
OFF
ON
(Beep setting) BEEP
: sets to ON if your car has ACC position.
: sets to OFF if your car has no ACC posi-
tion.
default:
Note:
¡
For an ACC-equipped car, select ON. The following
functions are available.
¡ The power is turned on automatically when inserting
a disc or magazine.
¡ selection disables turning on the power of the
main unit through the remote control.
: main unit-specific remote control
: rear monitor (option)-specific remote
control
default:
: displays the menu in English.
: displays the menu in French.
default: ENGLISH
FRENCH
ENGLISH
(Language setting) MENU DISPLAY
FRONT
REAR
FRONT
(Remote control setting) REMOTE CONTROL
OFF
ON
OFF
ON
(Setting ACC selection ON and
OFF) ACC SELECT
Caution
¡ Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
OFF
ACC
IGN
Caution
¡ Be sure to select OFF when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.