Peg-Perego SKATE - Manual (Page 15)

EN_English
Thank you for choosing a
Peg-Pérego product.
product features
• This product is numbered progressively.
• Skate is a 2-function product as the Skate-seat
converts from a carriage to a stroller.
• Skate is composed of two parts: Skate CHASSIS
and Skate-SEAT.
Skate CARRIAGE SEAT
• must be fixed to the Skate chassis to face
parents
• must be kept in the horizontal position
• legrest and backrest must be kept down
• must be equipped with a hood with open
zipper and a hood with closed zipper.
• can be used without the Skate chassis and can
be carried by the handlebar.
Skate STROLLER SEAT
• can be fixed to the Skate chassis so the child can
face parents or see what's ahead
• can be reclined to three different positions
• legrest must be up
• must be equipped with a hood with open
zipper and a hood with closed zipper
• cannot be used without the Skate chassis.
WARNING
• CAREFULLY READ INSTRUCTIONS
AND KEEP FOR FUTURE USE.
THE CHILD’S SAFETY COULD BE PUT
AT RISK IF THE INSTRUCTIONS ARE
NOT FOLLOWED.
• THIS PRODUCT IS DESIGNED FOR A
CHILD WHOSE MAXIMUM WEIGHT
IS 45 POUNDS (20 KG) AND WHOSE
MAXIMUM HEIGHT IS 43 INCHES
(110 CM). THIS SHOPPER BASKET IS
DESIGNED TO CARRY A MAXIMUM
WEIGHT OF 11 POUNDS (5 KG). ANY
CUPHOLDER EVENTUALLY PROVIDED
WITH THIS UNIT IS DESIGNED TO CARRY
A MAXIMUM WEIGHT SPECIFIED ON
THE CUPHOLDER ITSELF. ANY POACH
OR POCKET PROVIDED WITH THIS UNIT
IS DESIGNED TO CARRY A MAXIMUM
WEIGHT OF 0.44 POUNDS (0.2 KG).
• FAILURE TO FOLLOW MANUFACTURER’S
SPECIFICATIONS OR USE OF
ACCESSORIES OTHER THAN THOSE
APPROVED BY THE MANUFACTURER
MAY CAUSE THE UNIT TO BECOME
UNSTABLE.
• AVOID SERIOUS INJURY FROM FALLING
OR SLIDING OUT. ALWAYS USE
COMPLETE 5 POINT SEAT BELT.
• NEVER LEAVE YOUR CHILD
UNATTENDED.
• ALWAYS USE ALL THE BRAKES WHEN
EVER PARKED.
• TO AVOID SERIOUS INJURY, WHEN MAKING
ADJUSTMENTS ENSURE THE CHILD’S
BODY IS CLEAR OF ALL MOVING PARTS.
• ALL OPERATING AND ASSEMBLY
PROCEDURES SHOULD BE PERFORMED
BY AN ADULT.
• DO NOT LIFT THE STROLLER BY GRIPPING
THE FRONT BAR. THE FRONT BAR IS NOT
DESIGNED TO WITH STAND LOADS.
• ENSURE THAT THE STROLLER IS OPENED
CORRECTLY AND LOCKED IN POSITION
OF USE.
• CHECK TO MAKE SURE THAT THE
CAR SEAT OR THE BABY CARRIAGE
IS CORRECTLY FASTENED TO THE
STROLLER (WHERE APPLICABLE).
• DO NOT DRIVE THIS PRODUCT
AROUND STAIRS OR STEPS; CARE MUST
BE TAKEN IF UNIT IS USED ON STAIRS
OR ESCALATORS.
• DO NOT USE THE PRODUCT IF IT HAS
BROKEN OR MISSING PARTS.
• DO NOT USE NEAR FIRE OR EXPOSED
FLAME.
• WHEN USING THE PRODUCT AS A
CARRIAGE, PLEASE TUCK THE SEAT
BELTS/SAFETY HARNESS UNDER THE
UPHOLSTERY TO AVOID POSSIBLE
ENTANGLEMENT.
• NOTICE: THIS ARTICLE MEETS OR EXCEEDS
ALL REQUIREMENTS COVERED IN ASTM
F833 STANDARD AND LATEST REVISIONS.
product parts
• Check the package contents and contact our
Customer Service for any claim.
• Skate chassis with basket and pump
• 4 wheels with shock absorbers and ball bearings
(2 front lockable swivel wheels - 2 rear wheels
with air chamber)
• Bottle holder