ProForm PFB38031 - Manual (Page 13)

13
27
4
11
Weight
83
76
ATTACHING WEIGHTS TO THE LEG LEVER
To use the Leg Lever (4), slide the desired weights
(not included) onto the Weight Tube (11). Secure the
weights with a Weight Clip (83 or 84 [not shown]).
Weights can be added to the Curl Bar (not shown) in
the same manner. Secure the weights to the Curl Bar
with two Weight Clips (83 or 84 [not shown]).
WARNING:
Do not place more
than 150 pounds on the Weight Tube (11) or the
Curl Bar (47).
USING THE OLYMPIC WEIGHT ADAPTER
Press a 48mm Round Inner Cap (16) into the Olympic
Adapter (15). Attach the Olympic Adapter to the
Weight Tube (11) with a 1/4” x 9.5mm Allen Head Set
Screw (66).
Make sure that the Set Screw is in the
bottom of the Adapter.
Press a 48mm Round Inner Cap (16) into a Weight
Adapter (49). Attach the Weight Adapter to the Curl
Bar (47) with a 1/4” x 9.5mm Allen Head Set Screw
(66).
Make sure that the Set Screw is in the bot-
tom of the Adapter. Attach the other Weight
Adapter to the Curl Bar in the same manner.
USING THE BENCH FOR PRESS EXERCISES
To prevent the weight rack from tipping while perform-
ing press exercises on the bench, set the “L”-bracket
(76) over the Center Base (27).
49
11
15
66 16
47
16
66