Powerware powereware plus 8 - 10 kVA - Manual (Page 40)

UPS 8 – 15 kVA, 230V 50/60 Hz output
User’s Guide
1022403
Revision B1
40
7. Turn ON S3 switch to connect UPS output to load:
8. Turn OFF S1 switch to disconnect bypass output:
9. Use LCD to transfer the UPS to normal mode.
10. Remount the locking plate of the S1-3 swiches to the position to prevent the use of them.
11. UPS is now in Normal mode, see below:
ON ON
ON
OFF ON ON