Pride Mobility Quantum 500 - Manual (Page 27)

Quantum 500 www.quantumrehab.com 27
Figure 19. Swing-Away Footrests
ADJUSTMENT
SCREWS
FOOTREST
EXTENSION
SFR RELEASE LEVER
ADJUSTMENT
SCREWS
RELEASE LEVER B
Figure 20. Elevating Leg Rests
RELEASE LEVER A
LEG REST
EXTENSION
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform with a hex key.
See figure 17.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the setscrew.
2. Turn the setscrew counterclockwise to raise the front of
the foot platform.
3. Turn the setscrew clockwise to lower the front of the foot-
platform.
Swing-away Footrests
Swing-away Footrests (SFRs) enable you to rotate the foot-
rests to the side before you transfer onto or off or your power
chair. See figure 19.
To rotate the SFRs:
1. Push in the release lever.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two adjustment screws from the side of each
footrest extension.
2. Slide the footrest up or down to the desired length.
3. Reinstall the two adjustment screws.
Elevating Leg Rests (Optional)
Elevating Leg Rests (ELRs) offer an infinite range of adjust-
ment for the leg angle and a footrest adjustment range of 12–
19 in. See figure 20.
To rotate the ELRs:
1. Push in release lever A.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of each
leg rest extension.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
V . C O M F O R T A D J U S T M E N T S
ADJUSTMENT BOLT
LEG REST ADJUSTMENT
SCREWS
Figure 21. Heavy Duty Drop-In Leg Rests
LEG REST
HANGER
LEG REST
EXTENSION