Professional Series PS77401 - Manual (Page 4)

THIS APPLIANCE IS FOR HOUSEHOLD
USE ONLY!
AUTOMATIC CENTERING GUIDES
1. Lowering the toasting lever closes the centering guides, and holds the bread or toaster
food centrally in the toasting slots.
Note: The toasting lever(s) will not lock down unless the toaster is plugged into a 120V
AC electrical outlet.
TOASTING INSTRUCTIONS
1. Make sure crumb tray is pushed all the way into the back of the Toaster and the toast-
ing levers are in the UP position.
2. Make sure no bread or other objects are inside the toasting slots. Place Toaster on a
flat, level, heat resistant surface.
3. Plug the power cord into a 120V AC electrical outlet.
4. Position the browning selector knob to desired setting(s). To test toasting times for
browning, it is best to use both toasting slots’ position the browning selector know be-
tween (3) and (4) medium; then adjust each subsequent toasting to your preference.
5. Remove all protective wrappings from food before placing into the toasting slot(s).
6. Insert bread or toaster food into the toasting slot(s). Lower the toasting lever until
locked into place. The automatic centering guides hold food upright for uniform side-to-
side toasting. When the bread is lowered into position, toasting will begin.
NOTE: The toasting lever will not lock into position unless the toaster is plugged into a
120V AC electrical outlet.
NOTE: When toasting a single slice, the bread may be placed in any toasting slot.
NOTE: To prevent a fire hazard, never place bread over the opening of the toaster, al-
ways place bread into the slots.
NOTE: DO NOT change the browning selector knob selection during the toasting cycle.
First press the CANCEL button; then turn the browning selector knob to adjust the brown-
ing lever. Lower the toasting lever and toast until the desired toast color is achieved.
7. When the toast reaches the selected browning lever, it will pop up automatically.
8. Remove bread from toasting slot(s). Use care when removing bread as the bread and
the top of the toaster will still be hot.
9. To interrupt toasting, press the corresponding CANCEL button.
10. Unplug cord from wall outlet when not in use.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may
damage the heating element or cause injury.