Panasonic VQT9958 - Manual (Page 51)

51 (E)
CONTENTS
Setup menus
The underlined items indicates the initial setting.
USER menu <V BLANK>
No./Item Description
803
TELETEXT
DET
00
REC LINE1
:
14
REC LINE15
Sub-screen
For selecting the method used to detect the
lines in which the teletext signals are to be
recorded.
0000 OFF :
The teletext signals are not recorded.
0001 AUTO :
The teletext signals are automatically detected
and recorded.
0002 MANU :
The lines in which the teletext signals are to be
recorded are selected and set.
<Notes>
O The number of lines in which the teletext
signals can be recorded depends on the
number of recording lines which was entered
as the setup menu No. 800 (ADD LINE 25) or
No. 801 (ADD LINE 50) setting. [See “Number
of lines which can be set for teletext.”]
O When setting “MANU” is selected and the
STOP button is pressed, operation transfers to
the sub-screen, and the number of recording
lines can be selected.
To return from the sub-screen, press the STOP
button again.
O When the input signal is a non-standard signal
or N-STD has been selected for the setup
menu No. 303 (STD/NONSTD) setting, teletext
signals will not be played back correctly in EE
mode.
For selecting the lines in which the teletext
signals are to be recorded.
0000 OFF
0001 7&320
0002 8&321
0003 9&322
0004 10&323
0005 11&324
0006 12&325
0007 13&326
0008 14&327
0009 15&328
0010 16&329
0011 17&330
0012 18&331
0013 19&332
0014 20&333
0015 21&334
0016
22
Number of lines which can be set for TELETEXT
O When 25 Mbps is the
recording/playback format.
No. 800:
ADD LINE 25
setting value
Number of
lines which
can be set
14 OFF
7 YC422
10 YC411
14 Y1_B/W
14 Y1_BPF
14 C1
7 Y2_B/W
7 Y2_BPF
7 C2
O When 50 Mbps is the
recording/playback format.
No. 801:
ADD LINE 50
setting value
Number of
lines which
can be set
15
OFF
YC422
Y4_B/W
Y4_BPF
C4
No./Item Description
804
BLANK LINE
00
LINE 7&320
:
15
LINE 22&335
Sub-screen
This turns the blanking ON or OFF in the
vertical blanking period of the video output
signals.
0000 BLANK :
Blanking is effected forcibly for all lines.
0001 THRU :
No blanking is effected for any of the lines.
0002 MANU :
Blanking ON or OFF is selected for each line.
<Note>
When setting “MANU” is selected and the STOP
button is pressed, operation transfers to the sub-
screen, and ON or OFF can be selected for each
line. To return from the sub-screen, press the
STOP button again.
0000 BLANK : Blanking is forcibly effected.
0001 THRU : No blanking is effected.