Pioneer VSX-1015-K - Manual (Page 63)

Other connections 10
63
En
• Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN jack of this receiver with the CONTROL
OUT jack of your plasma display.
Before you can use the extra SR+ features, you need to
make a few settings in the receiver. See
SR+ Setup for
Pioneer plasma displays on page 67 for detailed
instructions.
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.
Note
• This receiver is compatible with all SR+ equipped
Pioneer plasma displays from 2003 onward.
• The 3-ringed SR+ cable from Pioneer is commer-
cially available under the part number ADE7095.
Contact the Pioneer Customer Support division for
more information on obtaining an SR+ cable (you
can also use a commercially available 3-ringed mini
phone plug for the connection).
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer plasma display even easier. These
features include:
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
See also SR+ Setup for Pioneer plasma displays on
page 67 for more on setting up the receiver.
1 Make sure that the plasma display and this
receiver are switched on and that they are
connected with the SR+ cable.
See Using this receiver with a Pioneer plasma display
above for more on connecting these components.
2 To switch SR+ mode on/off, press RECEIVER, then
the SR+ button.
The front panel display shows SR+ ON or SR+ OFF .
Note
• The automatic volume muting feature is enabled
separately; see SR+ Setup for Pioneer plasma displays
on page 67.
DVD player
VSX-1015
Pioneer plasma
display
Satellite receiver, etc
VIDEO
INPUT 1
VIDEO
INPUT 2
TV/SAT
AUDIO IN
DVD
AUDIO IN
MASTER VOLUME
DVD/LD TV/SAT DVR/VCR VIDEO1
CD CD-R/ TAPE/MD
STANDBY/ON
MULTI JOG
TUNER VIDEO2
VSX-1015 AUDIO/VIDEO MULTI-CHANNEL RECEIVER
LISTENING MODE SELECT
ENTER
+10
INPUT ATT FL DIMMER SR
DISC
RECEIVER
MULTI CONTROL
SOURCE INPUT
SELECT
DVD/LD TV/SAT DVR/VCR TV CONT
CD
TUNE
ST ST
CD-R/TAPE TUNER RECEIVER
ENTER
D.ACCESS
TOP MENU
CLASS
MENU
VSX_1015.book.fm 63 ページ ２００５年３月７日 月曜日 午後７時０分