Panasonic DP-C354 - Manual (Page 16)

16
Chapter 2 Basic Fax Transmission
Entering a Destination
Stations can be entered by using the following methods, or a combination of these:
Manual Dialing
To enter a destination telephone number, follow the steps below:
1
Follow the step 1 and 2 on page 14.
2
Enter the fax number using the keypad.
The Number Pad screen opens automatically.
z Telephone number field is limited to 36-digit
in length.
z For transmission to additional destinations,
enter their fax numbers, and then select
“Set” after each destination. When you finish
entering the last destination’s fax number,
select “OK”. (Do not select “Set” at this
time.)
z Select “Destinations:###” to confirm your
designated destinations.
z If you make a mistake, select “Clear” to
delete entries one digit at a time.
z Fax number entry is also possible from the
“Number Pad” in the Address Book screen,
instead of the control panel keypad.
Enter the telephone number directly. (See page 16)
Use the pre-programmed Address Book.
Manual Dialing
Using the Address Book
Use a Key Name (See page 18)
Search through “Favorites” (See page 18)
Use Group Dialing (See page 19)
Searching for a Destination
Search through the Address Book (Local Search) (See page 20)
Search through the LDAP Server (LDAP Search) (See page 21)
Redialing
Use the last dialed remote station. (See page 23)
Search the Address Book, or the Global directory service (LDAP)