Panasonic DMR-E75V - Manual (Page 59)

Advanced Operations
59
[RAM] [DVD-R]
You can specify the position to start transfer (dubbing) of the
program recorded on the tape to the disc.
≥Available discs for transfer (dubbing) from tape are DVD-RAM and
non-finalized DVD-R.
≥Copy-guarded video tapes cannot be dubbed. Most video tapes are
copy-guarded to prevent illegal reproduction and they cannot be
recorded with the following procedure.
Preparation
≥Select the unit viewing channel (or the AV input) on the TV.
DVD
≥Release protection (disc
l 30, cartridge l 18). [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it. ( l 20, 47)
VHS
≥Insert the video cassette containing the program to be copied
( l 48).
≥Check the channel. If “DC” channel is selected, transfer (dubbing)
does not work properly.
- When the “DC” channel is selected on VHS, you cannot select the
“TP” channel.
[1] Press [VHS] and press [ 1, PLAY].
Start playing the video cassette and find the recording start point.
≥Select the audio to be played (the audio to be recorded)
beforehand.
[2] Press [ ;, PAUSE] at the start point of the
recording.
[3] Press [DVD].
[4] Select “TP” channel with [CH, W, X].
≥The VHS picture is displayed on the TV.
[5] Press [REC MODE] to select the recording
mode.
[6] Press [ ¥, DVD REC].
≥Disc recording and VHS play start at the same time.
∫ When transfer (dubbing) is started, the following
operations also start automatically
≥“OSD” on VHS MENU ) “OFF” (l 56)
∫ Only the following operations are allowed while
transferring (dubbing)
≥Turning the unit off/on
≥Stopping transfer (dubbing) by pressing [STOP]
Note:
≥When the transfer (dubbing) is already started, you can switch the
output manually.
≥When a Copy-guarded tape is inserted, the message appears on
the display and the recording stops on the spot.
≥If a part of the tape recorded in VP mode is dubbed to disc, noises
may appear on the beginning of the dubbed part.
∫ Manual Transfer (Dubbing)
To pause or stop Manual Transfer (Dubbing)
You cannot stop or pause on DVD and VHS at the same time
∫ To pause or stop recording
Press [DVD] and press [ ;, PAUSE] or [∫, STOP].
∫ To pause or stop play
Press [VHS] and press [ ;, PAUSE] or [∫, STOP].
∫About TP channel
(TP: Dubbing input channel)
≥TP channel can be recorded only when the DVD input channel
is set to “TP”.
≥When you play back a tape turning the channel to “TP”, the
picture on VHS is displayed on the TV screen.
VHS DVD
PP-Sample.book 59 ページ ２００４年３月８日 月曜日 午後６時３分