Panasonic CF-T1 - Manual (Page 27)

27
Battery Power
Check the Remaining Battery Capacity When the Power is Off or in Standby/
Hibernation Mode
You can view the number of lighting LED indicators (B) to check the remaining battery
capacity when the AC adaptor is not connected and you slide the power switch (A) with the
display closed and the latch locked.
When the Remaining Battery Charge Becomes Low
The following is factory default setting.
Above settings can be changed.
1 Windows 2000
Select [Start] - [Settings] - [Control Panel] - [Power Options] - [Alarms].
Windows XP
Select [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] -
[Alarms].
2
Set alarm operations and remaining battery level for operating alarm functions.
When disabling the speaker by pressing
Fn
+
F4, the sound alarm is also disabled.
The number of lighting LED indicators Remaining Battery Capacity
0 0 % - 4 %
1 5 % - 24 %
2 25 % - 49 %
3 50 % - 74 %
4 75 % - 94 %
5 95 % - 100 %
When remaining battery capacity falls to 10%
[Low battery alarm]
When remaining battery capacity falls to 5%
[Critical battery alarm]
●
Displays a message indicating the low
battery level.
●
Displays a message indicating the low
battery level.
Windows 2000
●
The computer will enter standby mode.
Windows XP
●
The computer will enter hibernation mode.
Р Р
Charge your battery. Connect the AC adaptor before
starting up the computer next
time.
●
Connect the AC adaptor immediately.
If you do not have the AC adaptor with
you, exit any programs currently running,
then exit Windows, and confirm that the
power indicator is off.
●
Use a spare battery if you have one.
( Ÿ page 29 )
●
If you have neither the AC adaptor nor an
extra battery, power the computer off.
●
If the computer starts up or resumes
while the AC adaptor is not connected,
Windows may not operate properly or
alarm operations may not work properly.
B A