Polycom Version 1.4.x 17 - Manual (Page 95)

Administrator Guide - SoundPoint
®
IP / SoundStation
®
IP Optimization
Copyright © 2004 Polycom, Inc 87
4.6.1.7.1.3 Other <Other/>
These default parameter values are used for all packets which are not set explicitly.
4.6.1.7.2 IP TOS <IP/>
These settings control the “type of service” field in outgoing packets.
4.6.1.7.2.1 RTP <RTP/>
These parameters apply to RTP packets.
Attribute
Permitted
Values
Default Interpretation
qos.ethernet.other.user_priority 0-7 2 User-priority used for packets that
do not have a per-protocol setting.
Attribute
Permitted
Values
Default Interpretation
qos.ip.rtp.min_delay 0, 1 1 If set to 1, set min-delay bit in
the IP TOS field of the IP
header, or else don’t set it.
qos.ip.rtp.max_throughput 0, 1 1 If set to 1, set max-throughput
bit in the IP TOS field of the IP
header, or else don’t set it.
qos.ip.rtp.max_reliability 0, 1 0 If set to 1, set max-reliability
bit in the IP TOS field of the IP
header, or else don’t set it.
qos.ip.rtp.min_cost 0, 1 0 If set to 1, set min-cost bit in
the IP TOS field of the IP
header, or else don’t set it.
qos.ip.rtp.precedence 0-7 5 If set to 1, set precedence bits
in the IP TOS field of the IP
header, or else don’t set them.