Document Outline

• Getting Started 17
• Quick Start 33
• Common Operations 39
• Taking Pictures 54
• Playing Back and Deleting Images 97
• Editing and Printing Images 116
• Recording and Playing Back Sound 137
• Settings 140
• Appendix 156
  • 1 Getting Started
  • 2 Quick Start
  • 3 Common Operations
  • 4 Taking Pictures
  • 5 Playing Back and Deleting Images
  • 6 Editing and Printing Images
  • 7 Recording and Playing Back Sound
  • 8 Settings
  • 9 Appendix
• Camera Features
  • Getting Started
• Checking the Contents of the Package
  • Camera
  • Optio E60
  • Strap
  • O-ST62 (*)
  • Software (CD-ROM)
  • S-SW81
  • USB/AV cable
  • I-UAV77 (*)
  • Two AA
  • alkaline batteries
  • Operating Manual (this manual) / PC Connection Manual (CD-ROM)
  • Quick Guide
• Attaching the Strap
  • 1 Pass the narrow end of the strap through the strap lug.
  • 2 Pass the other end of the strap through the loop and pull tight.
• Powering the Camera
  • 1 Open the battery/card cover.
  • 2 Insert the batteries, making sure the (+) and (-) terminals on the batteries match the (+) and (-) symbols inside the battery compartment.
  • 3 Close the battery/card cover and slide it in the opposite direction of 1.
  • 1 Connect the DC terminal of the AC adapter to the DC input terminal of the DC coupler.
  • 2 Make sure that the camera is turned off and open the battery/card cover.
  • 3 Insert the DC coupler into the battery compartment, making sure the (+) and (-) terminals on the coupler match the (+) and (-) symbols inside the battery compartment.
  • 4 Open the DC coupler cable cover, pass the DC coupler cable through the opening, and close the battery/card cover.
  • 5 Connect the AC plug cord to the AC adapter.
  • 6 Plug the AC plug cord into the power outlet.
• Installing the SD Memory Card
  • 1 Open the battery/card cover.
  • 2 Insert the SD Memory Card into the SD Memory Card socket so that the label is facing toward the display.
  • 3 Close the battery/card cover and slide it in the opposite direction of 1.
  • 1 Open the battery/card cover.
  • 2 Push the card into the SD Memory Card socket to eject it.
• Turning the Camera On and Off
  • 1 Press the power switch.
  • 2 Press the power switch again.
  • 1 Press the power switch while holding down the Q button.
  • 2 Press the Q button again or press the shutter release button halfway.
• Initial Settings
  • 1 Use the four-way controller (2345) to choose the desired display language.
  • 2 Press the 4 button.
  • 1 Press the four-way controller (5).
  • 2 Use the four-way controller (2345) to select the language and press the 4 button.
  • 1 Press the 4 button.
  • 2 Press the 3 button.
  • 3 Press the four-way controller (5).
  • 4 Use the four-way controller (32) to select [Language/ ].
  • 5 Press the four-way controller (5).
  • 6 Use the four-way controller (2345) to select the language.
  • 7 Press the 4 button.
  • 3 Press the four-way controller (3).
  • 4 Press the four-way controller (5).
  • 5 Use the four-way controller (45) to choose the city.
  • 6 Press the four-way controller (3).
  • 7 Use the four-way controller (45) to select O (On) or P (Off).
  • 8 Press the 4 button.
  • 9 Press the 4 button.
  • 1 Press the four-way controller (5).
  • 2 Use the four-way controller (23) to choose the date and time display style.
  • 3 Press the four-way controller (5).
  • 4 Use the four-way controller (23) to select [24h] (24-hour display) or [12h] (12-hour display).
  • 5 Press the four-way controller (5).
  • 6 Press the four-way controller (3).
  • 7 Press the four-way controller (5).
  • 8 Use the four-way controller (23) to change the month.
  • 9 Press the 4 button.
  • Quick Start
    • Taking Still Pictures
      • 1 Press the power switch.
      • 2 Compose the picture on the display.
      • 3 Press the shutter release button halfway.
      • Focus frame
        • 4 Press the shutter release button fully.
        • 1 Press the shutter release button halfway.
        • 2 Confirm the focus frame on the display turns green.
        • 3 Press the shutter release button fully.
• Quick Start
  • Playing Back Still Pictures
    • 1 Press the Q button after taking a picture.
    • 1 Press the Q button after taking a picture.
    • 2 Press the four-way controller (45).
    • 1 Press the Q button after taking a picture.
    • 2 Press the four-way controller (3).
    • 3 Use the four-way controller (2345) to select s (Image Rotation) and press the 4 button.
    • 4 Use the four-way controller (2345) to choose the rotation direction and press the 4 button.
    • 1 Press the i button when playing back an image.
    • 2 Press the four-way controller (2) to select [Delete] and press the 4 button.
    • 3 Press the Q button again or press the shutter release button halfway.
  • Common Operations
  • Understanding the Button Functions
  • Using the Menu
    • 1 Press the 3 button in the capture mode.
    • 2 Press the four-way controller (3).
    • 3 Press the four-way controller (3).
    • 4 Press the four-way controller (5).
    • 5 Use the four-way controller (23) to change the setting.
    • 6 Press the shutter release button halfway.
    • 6 Press the Q button.
    • 6 Press the 4 button or the four-way controller (4).
    • 6 Press the 3 button.
  • Using the Mode Palettes
    • 1 Press the four-way controller (3).
    • 2 Use the four-way controller (2345) to select an icon.
    • 3 Press the 4 button.
    • Taking Pictures
  • Taking Pictures in a Selected Mode
    • 1 Press the Green button in the capture mode.
    • 2 Press the shutter release button halfway.
    • 3 Press the shutter release button fully.
    • 1 Press the four-way controller (3) in the capture mode.
    • 2 Use the four-way controller (2345) to select b.
    • 3 Press the 4 button.
    • 4 Press the shutter release button halfway.
    • 5 Press the shutter release button fully.
    • 1 Press the four-way controller (3) in the capture mode.
    • 2 Use the four-way controller (2345) to select R.
    • 3 Press the 4 button.
    • 4 Set the functions you want to use.
    • 5 Press the shutter release button halfway.
    • 6 Press the shutter release button fully.
    • 1 Press the four-way controller (3) in the capture mode.
    • 2 Use the four-way controller (2345) to select , or .
    • 3 Press the 4 button.
    • 4 Press the shutter release button halfway.
    • 5 Press the shutter release button fully.
    • 1 Press the four-way controller (3) in the capture mode.
    • 2 Use the four-way controller (2345) to select .
    • 3 Press the 4 button.
    • 4 Use the four-way controller (23) to select , , , , or .
    • 5 Press the 4 button.
    • 6 Press the shutter release button halfway.
    • 7 Press the shutter release button fully.
    • 1 Press the four-way controller (3) in the capture mode.
    • 2 Use the four-way controller (2345) to select A or .
    • 3 Press the 4 button.
    • 4 Press the shutter release button halfway.
    • 5 Press the shutter release button fully.
    • 1 Press the four-way controller (3) in the capture mode.
    • 2 Use the four-way controller (2345) to select 4.
    • 3 Press the 4 button.
    • 4 Press the shutter release button halfway.
    • 5 Press the shutter release button fully.
    • 1 Press the four-way controller (3) in the capture mode.
    • 2 Use the four-way controller (2345) to select A, and press the 4 button.
    • 3 Use the four-way controller (45) to select the direction to stitch.
    • 4 Take the first frame.
    • 5 Pan the camera to the right and take the second frame.
    • 6 Press the 4 button.
    • 7 Use the four-way controller (23) to select [Save], [Discard], or [Cancel] and press the 4 button.
    • 1 Press the four-way controller (3) in the capture mode.
    • 2 Use the four-way controller (2345) to select Y.
    • 3 Press the 4 button.
    • 4 Use the four-way controller (2345) to choose the frame you want to use.
    • 5 Press the 4 button.
    • 6 Press the 4 button.
    • 7 Press the shutter release button halfway.
    • 8 Press the shutter release button fully.
  • Taking Pictures with Customized Settings
    • 1 Press the 3 button in the capture mode.
    • 2 Use the four-way controller (23) to select [Recorded Pixels].
    • 3 Press the four-way controller (5).
    • 4 Use the four-way controller (23) to change the number of recorded pixels.
    • 5 Press the 4 button.
    • 6 Press the 3 button.
    • 1 Press the 3 button in the capture mode.
    • 2 Use the four-way controller (23) to select [Quality Level].
    • 3 Press the four-way controller (5).
    • 4 Use the four-way controller (23) to change the quality level.
    • 5 Press the 4 button.
    • 6 Press the 3 button.
    • 1 Press the Zoom button in the capture mode.
    • 1 Press the 3 button in the capture mode.
    • 2 Use the four-way controller (23) to select [Digital Zoom].
    • 3 Use the four-way controller (45) to select O (On) or P (Off).
    • 4 Press the 3 button.
    • 1 Press the four-way controller (5) in the capture mode.
    • 2 Press the 4 button.
    • 1 Find alternate subject that is in the same distance from the camera as the desired subject.
    • 2 Focus on the alternate subject.
    • 3 Press the shutter release button halfway.
    • 4 While holding the shutter release button halfway, move the camera to obtain the desired composition.
    • 5 Press the shutter release button fully.
    • 1 Press the 3 button in the capture mode.
    • 2 Use the four-way controller (23) to select [Focusing Area].
    • 3 Press the four-way controller (5).
    • 4 Use the four-way controller (23) to change the setting.
    • 5 Press the 4 button.
    • 6 Press the 3 button.
    • 1 Press the four-way controller (4) in the capture mode.
    • 2 Press the 4 button.
    • 1 Press the 3 button in the capture mode.
    • 2 Use the four-way controller (23) to select [Sensitivity].
    • 3 Press the four-way controller (5).
    • 4 Use the four-way controller (23) to change the sensitivity.
    • 5 Press the 4 button.
    • 6 Press the 3 button.
    • 1 Press the 3 button in the capture mode.
    • 2 Use the four-way controller (23) to select [EV Compensation].
    • 3 Use the four-way controller (45) to select the EV value.
    • 4 Press the 3 button.
  • Doing More with Useful Functions
    • 1 Press the four-way controller (2) in the capture mode.
    • 2 Use the four-way controller (453) to select g or Z and press the 4 button.
    • 3 Press the shutter release button halfway.
    • 4 Press the shutter release button fully.
    • 1 Press the four-way controller (2) in the capture mode.
    • 2 Use the four-way controller (45) to select 1 or f and press the 4 button.
    • 3 Press the shutter release button halfway.
    • 4 Press the shutter release button fully.
    • 1 Press the 3 button in the capture mode.
    • 2 Use the four-way controller (23) to select [Date Imprint].
    • 3 Press the four-way controller (5).
    • 4 Use the four-way controller (23) to select [Date], [Date & Time], [Time] or [Off].
    • 5 Press the 4 button.
    • 6 Press the 3 button.
    • 1 Press the 3 button in the capture mode.
    • 2 Press the four-way controller (23) to select [Memory].
    • 3 Press the four-way controller (5).
    • 4 Use the four-way controller (23) to choose an item.
    • 5 Use the four-way controller (45) to select O (On) or P (Off).
    • 6 Press the 4 button.
    • 7 Press the 3 button.
  • Recording Movies
    • 1 Press the four-way controller (3) in the capture mode.
    • 2 Use the four-way controller (2345) to select d (Movie).
    • 3 Press the 4 button.
    • 1
      • 4 Press the shutter release button fully.
      • 5 Press the shutter release button fully.
      • 1 Press the 3 button in the capture mode.
      • 2 Use the four-way controller (23) to select [Movie].
      • 3 Press the four-way controller (5).
      • 4 Use the four-way controller (23) to select [Recorded Pixels].
      • 5 Press the four-way controller (5).
      • 6 Use the four-way controller (23) to change the recorded pixels.
      • 7 Press the 4 button.
      • 8 Press the 3 button twice.
      • 4 Use the four-way controller (23) to select [Frame Rate].
      • 5 Press the four-way controller (5).
      • 6 Use the four-way controller (23) to change the frame rate.
      • 7 Press the 4 button.
      • 8 Press the 3 button twice.
      • 1 Press the 3 button in the capture mode.
      • 2 Use the four-way controller (23) to select [Movie].
      • 3 Press the four-way controller (5).
      • 4 Use the four-way controller (23) to select [Movie SR].
      • 5 Use the four-way controller (45) to select O (On) or P (Off).
      • 6 Press the 3 button twice.
    • Playing Back and Deleting Images
  • Playing Back Images on the Camera
    • Normal Display
      • 1 In the playback mode, press f on the Zoom button.
      • 2 Press the 4 button.
      • 1 In the playback mode, press f on the Zoom button.
      • 2 Press f on the Zoom button.
      • 1 Enter the playback mode and use the four-way controller (45) to choose the image you want to magnify.
      • 2 Press y on the Zoom button.
      • 3 Press the 4 button.
      • 1 Enter the playback mode and use the four-way controller (45) to choose the image you want to magnify.
      • 2 Confirm that the I icon is displayed in the image and press the I button.
      • 3 Press the 4 button.
      • 1 Enter the playback mode and use the four-way controller (45) to choose an image to start the slideshow with.
      • 2 Press the four-way controller (3).
      • 3 Use the four-way controller (2345) to select u (Slideshow).
      • 4 Press the 4 button twice.
      • 5 Press any button other than the 4 button or the power switch.
      • 1 Press the four-way controller (3) in the playback mode.
      • 2 Use the four-way controller (2345) to select u.
      • 3 Press the 4 button.
      • 4 Use the four-way controller (23) to select [Interval].
      • 5 Press the four-way controller (5).
      • 6 Use the four-way controller (23) to change the interval and press the 4 button.
      • 7 Use the four-way controller (23) to select [Screen Effect].
      • 8 Use the four-way controller (23) to select [Sound Effect].
      • 9 Use the four-way controller (45) to select O (On) or P (Off).
      • 10 Press the 4 button.
  • Playing Back Movies
    • 1 Enter the playback mode and use the four-way controller (45) to choose the movie you want to play back.
    • 2 Press the four-way controller (2).
    • 3 Press the four-way controller (3).
  • Playing Back Images on a TV
    • 1 Connect the supplied USB/AV cable to the USB/AV terminal on the camera.
    • 2 Connect the other ends of the USB/AV cable (yellow: video, white: audio) to the video input terminal and audio input terminal on the AV equipment.
    • 3 Turn the AV equipment on.
    • 4 Turn the camera on.
  • Deleting Images and Sound Files
    • 1 Enter the playback mode and use the four-way controller (45) to choose the image/sound file you want to delete.
    • 2 Press the i button.
    • 3 Use the four-way controller (23) to select [Delete].
    • 4 Press the 4 button.
    • 1 In the playback mode, press f on the Zoom button.
    • 2 Press the i button.
    • 3 Use the four-way controller (2345) to choose the images and sound files that you want to delete and press the 4 button.
    • 4 Press the i button.
    • 5 Use the four-way controller (23) to select [Select & Delete].
    • 6 Press the 4 button.
    • 1 Press the i button twice in the playback mode.
    • 2 Use the four-way controller (23) to select [Delete All].
    • 3 Press the 4 button.
    • 1 After deleting a file, press the four-way controller (3).
    • 2 Use the four-way controller (2345) to select ] (Image Recovery).
    • 3 Press the 4 button.
    • 4 Use the four-way controller (23) to select [Recover].
    • 5 Press the 4 button.
    • 1 Press the four-way controller (3) in the playback mode.
    • 2 Use the four-way controller (2345) to select Z (Protect).
    • 3 Press the 4 button.
    • 4 Use the four-way controller (23) to select [Select image/sound].
    • 5 Press the 4 button.
    • 6 Use the four-way controller (23) to select [Protect].
    • 7 Press the 4 button.
    • 1 Press the four-way controller (3) in the playback mode.
    • 2 Use the four-way controller (2345) to select Z (Protect).
    • 3 Press the 4 button.
    • 4 Use the four-way controller (23) to select [All Images/Sounds].
    • 5 Press the 4 button.
    • 6 Use the four-way controller (23) to select [Protect].
    • 7 Press the 4 button.
    • Editing and Printing Images
  • Editing Images
    • 1 Enter the playback mode and use the four-way controller (45) to choose the image you want to resize.
    • 2 Press the four-way controller (3).
    • 3 Use the four-way controller (2345 ) to select n (Resize).
    • 4 Press the 4 button.
    • 5 Select [Recorded Pixels] and [Quality Level].
    • 6 Press the 4 button.
    • 7 Use the four-way controller (23) to select [Overwrite] or [Save as].
    • 8 Press the 4 button.
    • 1 Enter the playback mode and use the four-way controller (45) to choose the image you want to crop.
    • 2 Press the four-way controller (3).
    • 3 Use the four-way controller (2345) to select o (Cropping).
    • 4 Press the 4 button.
    • 5 Specify the portion to be cropped.
    • 6 Press the 4 button.
    • 1 Press the four-way controller (3) in the playback mode.
    • 2 Use the four-way controller (2345) to select p (Image/Sound Copy).
    • 3 Press the 4 button.
    • 4 Use the four-way controller (23) to select [f}{].
    • 5 Press the 4 button.
    • 4 Use the four-way controller (23) to select [{}f].
    • 5 Press the 4 button.
    • 6 Use the four-way controller (45) to select the file you want to copy.
    • 7 Press the 4 button.
    • 1 Enter the playback mode and use the four-way controller (45) to choose the image you want to edit.
    • 2 Press the four-way controller (3).
    • 3 Use the four-way controller (2345) to select D (Digital Filter).
    • 4 Press the 4 button.
    • 5 Use the four-way controller (23) to choose a digital filter.
    • 6 Press the 4 button.
    • 7 Use the four-way controller (23) to select [Overwrite] or [Save as].
    • 8 Press the 4 button.
    • 1 Enter the playback mode and use the four-way controller (45) to choose the image you want to edit.
    • 2 Press the four-way controller (3).
    • 3 Use the four-way controller (2345) to select q (Brightness Filter).
    • 4 Press the 4 button.
    • 5 Use the four-way controller (45) to adjust the brightness.
    • 6 Press the 4 button.
    • 7 Use the four-way controller (23) to select [Overwrite] or [Save as].
    • 8 Press the 4 button.
    • 1 Enter the playback mode and use the four-way controller (45) to choose the image to which you want to add a frame.
    • 2 Press the four-way controller (3).
    • 3 Use the four-way controller (2345) to select Y (Frame Composite).
    • 4 Press the 4 button.
    • 5 Use the four-way controller (2345) to choose a frame.
    • 6 Press the 4 button or y on the Zoom button.
    • 7 Press the 4 button.
    • 8 Press the 4 button.
    • 9 Use the four-way controller (23) to select [Overwrite] or [Save as].
    • 10 Press the 4 button.
    • 1 Enter the playback mode and use the four-way controller (45) to choose the image you want to correct.
    • 2 Press the four-way controller (3).
    • 3 Use the four-way controller (2345) to select Z (Red- eye Compensation).
    • 4 Press the 4 button.
    • 5 Use the four-way controller (23) to select [Overwrite] or [Save as].
    • 6 Press the 4 button.
  • Setting the Printing Service (DPOF)
    • 1 Press the four-way controller (3) in the playback mode.
    • 2 Use the four-way controller (2345) to select r (DPOF).
    • 3 Press the 4 button.
    • 4 Use the four-way controller (23) to select [Single Image].
    • 5 Press the 4 button.
    • 6 Use the four-way controller (23) to choose the number of copies.
    • 7 Use the Green button to choose whether to insert the date or not.
    • 8 Press the 4 button.
    • 1 Display the screen for DPOF settings in the playback mode.
    • 2 Use the four-way controller (23) to select [All Images].
    • 3 Press the 4 button.
    • 4 Choose the number of copies and whether to insert the date or not.
    • 5 Press the 4 button.
  • Printing Using PictBridge
    • 1 Select [PictBridge] for the [USB Connection] mode on the [W Setting] menu.
    • 2 Turn off the camera.
    • 3 Connect the camera to the printer using the supplied USB/AV cable.
    • 4 Turn the printer on.
    • 5 When the printer is ready to print, turn the camera on.
    • 1 In the printing mode selection screen, use the four-way controller (23) to select [Single Image].
    • 2 Press the 4 button.
    • 3 Use the four-way controller (45) to choose an image to print.
    • 4 Use the four-way controller (23) to choose the number of copies.
    • 5 Use the Green button to choose whether to insert the date or not.
    • 6 Press the 4 button.
    • 7 Press the Green button.
    • 8 Select [Paper Size] and press the four-way controller (5).
    • 9 Use the four-way controller (2345) to choose the paper size.
    • 10 Press the 4 button.
    • 11 Use the four-way controller (23) to select [Paper Type] and press the four-way controller (5).
    • 12 Use the four-way controller (23) to select the paper type and press the 4 button.
    • 13 Press the 3 button.
    • 14 Press the 4 button.
    • 1 In the printing mode selection screen, use the four-way controller (23) to select [All Images].
    • 2 Press the 4 button.
    • 3 Choose the number of copies and whether to insert the date or not.
    • 4 Press the 4 button.
    • 5 Press the 4 button on the print settings confirmation screen.
    • 1 In the printing mode selection screen, use the four-way controller (23) to select [DPOF AUTOPRINT].
    • 2 Press the 4 button.
    • 3 Press the 4 button.
    • 4 Press the 4 button on the print settings confirmation screen.
    • 1 Turn off the camera.
    • 2 Disconnect the USB/AV cable from the camera and the printer.
    • Recording and Playing Back Sound
  • Recording Sound (Voice Recording Mode)
    • 1 Press the four-way controller (3) in the capture mode.
    • 2 Use the four-way controller (2345) to select O (Voice Recording).
    • 3 Press the 4 button.
    • 1
      • 4 Press the shutter release button fully.
      • 5 Press the shutter release button fully.
  • Playing Back Sound
    • 1 Press the Q button.
    • 1
      • 2 Use the four-way controller (45) to choose a sound file to play back.
      • 3 Press the four-way controller (2).
      • 4 Press the four-way controller (3).
    • Settings
  • Camera Settings
    • 1 Use the four-way controller (23) to select [Format] on the [R Setting] menu.
    • 2 Press the four-way controller (5).
    • 3 Use the four-way controller (23) to select [Format].
    • 4 Press the 4 button.
    • 1 Use the four-way controller (23) to select [Sound] on the [R Setting] menu.
    • 2 Press the four-way controller (5).
    • 3 Use the four-way controller (23) to select [Volume].
    • 4 Use the four-way controller (45) to adjust the volume.
    • 5 Use the four-way controller (23) to select [Shutter Sound].
    • 6 Press the four-way controller (5).
    • 7 Use the four-way controller (23) to select [1], [2], [3] or [Off] and press 4 button.
    • 8 Set [Operation Sound] in the same way as in Steps 5 to 7.
    • 9 Press the 3 button.
    • 1 Use the four-way controller (23) to select [Date Adjust] on the [R Setting] menu.
    • 2 Press the four-way controller (5).
    • 3 Press the four-way controller (5).
    • 4 Use the four-way controller (23) to choose the date display style.
    • 5 Press the four-way controller (5).
    • 6 Use the four-way controller (23) to select [24h] (24-hour display) or [12h] (12-hour display).
    • 7 Press the four-way controller (5).
    • 8 Press the four-way controller (3).
    • 9 Press the four-way controller (5).
    • 10 Use the four-way controller (23) to change the month.
    • 11 Press the four-way controller (5).
    • 12 Change the time in the same way as in Steps 7 to 10.
    • 13 Press the 4 button.
    • 1 Use the four-way controller (23) to select [World Time] on the [R Setting] menu.
    • 2 Press the four-way controller (5).
    • 3 Use the four-way controller (23) to select X (Destination).
    • 4 Press the four-way controller (5).
    • 5 Use the four-way controller (45) to change the Destination city.
    • 6 Use the four-way controller (23) to select [DST].
    • 7 Use the four-way controller (45) to select O (On) or P (Off).
    • 8 Press the 4 button.
    • 9 Press the 3 button twice.
    • 1 Use the four-way controller (23) to select [World Time] on the [R Setting] menu.
    • 2 Press the four-way controller (5).
    • 3 Use the four-way controller (23) to select [Select time].
    • 4 Press the four-way controller (5).
    • 5 Use the four-way controller (23) to select X (Destination) or W (Hometown).
    • 6 Press the 4 button.
    • 7 Press the 3 button twice.
    • 1 Use the four-way controller (23) to select [Language/ ] on the [R Setting] menu.
    • 2 Press the four-way controller (5).
    • 3 Use the four-way controller (2345) to select the language.
    • 4 Press the 4 button.
    • 1 Use the four-way controller (23) to select [Folder Name] on the [R Setting] menu.
    • 2 Press the four-way controller (5).
    • 3 Use the four-way controller (23) to select [Standard] or [Date].
    • 4 Press the 4 button.
    • 1 Use the four-way controller (23) to select [USB Connection] on the [R Setting] menu.
    • 2 Press the four-way controller (5).
    • 3 Use the four-way controller (23) to select [PC] or [PictBridge].
    • 4 Press the 4 button.
    • 1 Use the four-way controller (23) to select [Video Out] on the [R Setting] menu.
    • 2 Press the four-way controller (5).
    • 3 Use the four-way controller (23) to select [NTSC] or [PAL].
    • 4 Press the 4 button.
    • 1 Use the four-way controller (23) to select [Brightness Level] on the [R Setting] menu.
    • 2 Use the four-way controller (45) to adjust the brightness.
    • 3 Press the 3 button.
    • 1 Use the four-way controller (23) to select [Power Saving] on the [R Setting] menu.
    • 2 Press the four-way controller (5).
    • 3 Use the four-way controller (23) to select [2min], [1min], [30sec], [15sec], [5sec] or [Off].
    • 4 Press the 4 button.
    • 1 Use the four-way controller (23) to select [Auto Power Off] on the [R Setting] menu.
    • 2 Press the four-way controller (5).
    • 3 Use the four-way controller (23) to select [5min], [3min] or [Off].
    • 4 Press the 4 button.
    • 1 Use the four-way controller (23) to select [Reset] on the [R Setting] menu.
    • 2 Press the four-way controller (5).
    • 3 Use the four-way controller (23) to select [Reset].
    • 4 Press the 4 button.
    • Appendix
  • List of World Time Cities
  • Default Settings
  • Functions Available for Each Shooting Mode
  • Optional Accessories
  • Messages
  • Troubleshooting
    • Problem
    • Cause
    • Remedy
  • Main Specifications
  • WARRANTY POLICY
  • Index