Patton electronic 1080A-64 - Manual (Page 21)

21
4.4 RS-232 CONNECTION
Connect the synchronous or asynchronous output of your RS-232 device
to the DB-25 interface on the rear panel of the Model 1080A Series.
Note The Model 1080A Series is wired to connect to a DTE. If your
RS-232 output device is DCE, call Patton Technical Support at:
(301) 975-1007; http://www.patton.com; or [email protected]
for specific installation instructions.
HOST FIRST SLAVE SECOND SLAVE
XMT RCV
RCV
XMT RCV
RCV
RCV XMT
XMT
RCV XMT
XMT
HOST FIRST SLAVE SECOND SLAVE
XMT XMT
XMT
XMT XMT
XMT