Philips HTS3410D - Manual (Page 21)

English
21
Disc Operations
Repeating a section within a title/
track
1
While playing a disc, press REPEAT A-B
at the starting point.
2
Press REPEAT A-B again to end the
section.
➜ The section A and B can be set only
within the same title/track.
➜ The section will now repeat
continuously.
3
Press REPEAT A-B again to resume
normal playback.
Program favourite tracks
(audio CDs and VCDs)
You can play the contents of the disc in
the order you want
, by programming the
order of the tracks to be played. Up to
99 tracks can be stored.
1
Stop playback, then press PROG on the
front panel to enter program mode.
2
Use the numeric keypad (0-9) to enter
a valid track number.
➜ "
FULL" will appear if you have
programmed 99 tracks.
3
Press OK to store the track.
4
Repeat steps
2
~
3
to select other tracks.
5
Press ÉÅ to start program playback.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Clearing the program
● Stop playback, then press the Ç again.
➜ "
PROG CLR" appears.
Helpful Hints:
– If the DVD system is disconnected from
the power supply, it will erase the program.
– For VCD, the program option is only
possible if the PBC mode is turned off.
Using the menu bar to
program
IMPORTANT!
You have to turn on your TV and set
to the correct Video In channel. (See
page 14
“Setting the TV”).
1
Stop playback, then press SYSTEM
MENU.
➜ The menu bar will appear across the
top of the TV screen.
2
Press 1 2 to select and press 4 to
enter the program menu.
PROGRAM P 00 : 00
3
Use the numeric keypad (0-9) to enter
the track number to be programmed.
➜ "
FULL" will appear if you have
programmed 99 tracks.
4
Press ÉÅ to start program playback.
To clear the program
● Stop playback, then press Çagain.