Philips DC570/37B - Manual (Page 14)

14
English
Basic Functions
Important!
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press Power on the set.
➜ The system will switch to the last selected
source.
● Press source on the set repeatedly or USB,
AUX
, iPod or TUNER on the remote
control.
➜ The system will switch to the selected source.
Switching the system to Eco
Power Standby mode
● Press and hold POWER (or POWER on the
remote) in the active mode.
➜ The system enters Eco power standby mode.
● If the system is normal standby mode, press and
hold POWER on the front panel for 3 seconds
or more to switch to Eco power standby or vice
versa.
Switching the system to Standby
mode
● Press Power (or Power on the remote
control).
➜ The volume level (up to a maximum volume
of 12), last selected mode, source and tuner
presets will be retained in the system's memory.
Power Saving Automatic Standby
As a power-saving feature, the system
automatically switches to standby 15 minutes
after a USB connected device has reached the
end of the last track and no control is operated.
Adjusting volume and sound
1
Press VOLUME -/+ to decrease or increase the
volume.
➜ Display shows the volume level VoL and a
number 0-32.
2
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback will continue without sound and
MUTE appears.
● To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
SHUFFLE
ALBUM/
PRESET
REPEAT
SLEEP MUTE
SET TIME
TIMER PROG
USB MENU AUX
POWER TUNER
TUNING
VOL
TUNING +
DSC
DBB
pg1-24-DC570_37_Eng 2008.3.20, 16:53 14