Display stand – Planar Dome E4c User Manual
Page 12
Advertising
4 | Dome E4c Display
Display stand
Always grasp the sides of the display to adjust the viewing angle, tilt,
and height of the screen.
NOTE: To unlock the stand column, move the lever to the left. You can
only lock the stand column when the display height is in the lowest
position, which is also the shipping/storage position.
The stand includes an integrated USB hub and can be used for
cable management. See
for more information.
Improper handling of the display unit may result in hand injury. Use
caution when adjusting the position of the display. Never place your
hands between the display and the stand base when lowering the
height. Avoid holding the bottom area of the display.
mx4.book Page 4 Wednesday, August 9, 2006 3:03 PM
Advertising