Pioneer DVD Navigation Unit AVIC-80DVD - Manual (Page 139)

137
Chapter
6
Combining and Using Pioneer A
V
Equipment
■Displaying the XM MENU
1 Press A.MENU (AUDIO) button when source is XM.
2 Select “XM TUNER” and press A.MENU (AUDIO) button.
The XM MENU is displayed as follows:
CH.SELECT MODE, P.CH RECALL, P.CH MEMORY
You can operate a desired function. For details, refer to the pages for each of the functions.
➲
Select “BACK” in the MENU display or press BACK/FUNC button to return to the previous
display.
➲
To return to the frequency display, press BAND/ESC button.
➲
If you do not operate the function within about 30 seconds, the display is automatically
returned to the frequency display.
■Switching the channel select mode
You can switch if you select a Channel with a Channel NUMBER or from a Channel Cate-
gory when you select a channel.
1 Press
5 5 5 5 or ∞ ∞ ∞ ∞ to select “CH.SELECT MODE” from the XM TUNER MENU, and press
A.MENU (AUDIO) button.
2 Press
2 2 2 2 or 3 3 3 3 to select the desired channel select mode.
CH NUMBER (Channel number select mode) - CATEGORY (Channel category select
mode)
■Recalling channel
If you press
5 or ∞ you can easily store up to six previously registered channels with the 5
or
∞ button.
1 Press
5 5 5 5 or ∞ ∞ ∞ ∞ to select P.CH RECALL from the XM TUNER MENU, and press A.MENU
(AUDIO) button.
2 Select a preset channel number with
5 5 5 5 or ∞ ∞ ∞ ∞ and press A.MENU (AUDIO) button.
When you have finished, press BAND/ESC button to return to the source display.