5 connections to the pd8130/pd8150, Connector panel access, Connections to the pd8130/pd8150 – Planar PD8130 User Manual
Page 36: Prel imina ry
Advertising
22
Planar PD8130/PD8150 Installation/Operation Manual
PREL
IMINA
RY
3.5
Connections to the
PD8130/PD8150
Proceed as follows to connect the PD8130/PD8150 to your video sources,
external controller(s) – if present – and AC power.
When connecting your equipment:
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
Connector Panel Access
Using a flat-blade screwdriver, loosen
the two screws holding the rear
compartment cover in place.
Then, remove the rear compartment
cover by tilting it upward.
➤
Advertising
This manual is related to the following products: