Pioneer A-109 - Manual (Page 6)

6
4 TAPE 2 MONITOR button/indicator
Use when there is an adaptor component (graphic equalizer,
etc.) or cassette deck connected to the TAPE2 MONITOR
terminals.
On : Indicator lights when using the adaptor component or
listening to the cassette deck.
Off : Indicator goes off when not in use.
NOTES:
• When no connections are made to the TAPE2 MONITOR
terminals, or when they are not in use, be sure to set this
switch to the off position. (No sound will be heard if it is set
to the on position.)
• When the TAPE2 MONITOR indicator is on and the INPUT
SELECTOR knob is not set to TAPE1/CD-R/MD, the signals
which are input through TAPE2 MONITOR are then output
at TAPE1/CD-R/MD REC OUT.
1 POWER ( —OFF/_ON) switch
Press to turn power to the unit ON and OFF.
2 VOLUME control
Use to adjust the volume level.
3 INPUT SELECTOR knob/indicators
Turn the knob clockwise or counterclockwise so that the
indicator lights for your desired input source. Turning the knob
clockwise causes the lit indicator to right. Turning counter-
clockwise causes it to left.
CD
: For compact disc playback with a CD player.
TUNER : For AM or FM broadcast reception with a tuner.
PHONO : For record playback with a turntable.
LINE : Set to this position when listening to the pro-
gram from a component connected to the LINE
terminals.
[ FRONT PANEL ]
PANEL FACILITIES
: For playback with a cassette deck, CD recorder
or MD recorder connected to the TAPE1/CD-R/
MD terminals.
TAPE 1/
CD-R/MD
PHONES
SPEAKERS
POWER
OFF ON
STEREO AMPLIFIER
_ —
z¿,?/ Direct Energy MOS
TAPE 1/
CD-R/MD
TAPE 2
MONITOR LINE TUNER PHONO CD
BASS
+ –
TREBLE
+ –
VOLUME
MIN MAX
LOUDNESS DIRECT
BALANCE
R L
INPUT SELECTOR
TAPE 2
MONITOR
-
1 2 3 4
5 6 7 8 9 0